Question about hooking up two amplifiers


I have my 4 channel amp already installed, and I have it all ran using the RF dual amp kit, do I just connect the second set of rca's to the line in on the mono amp i'm planning? or do i run another set from the subwoofer out on the hu... i would think running it to the other amp would be fine as long as the settings are correct on the amp, no? if you know of a site w/an tutorial / explanation of this it would be appreciated... thanks a ton.

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 5026
Registered: Dec-03
run a set of RCA lines from the sub outs of the stereo to the amp.
then you can use sub controls from the head

Eric Smithson
Unregistered guest
I have a 400 watt 2 channel amp and one 12" mtx sub that takes 600 max. I was wondering how i could get the amp to push the full 400 to my sub. i didnt kno if i could bridge or new with this stuff..
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us