Bridging my amp for subs?

 

New member
Username: Heresy209

Post Number: 10
Registered: May-04
I was wondering how to bridge my amp for my subs.

The amp:
Eclipse 3242(Fujitsu Ten) 4x110w at 4ohm, 2/3/4channel

The subs:
2 12" Boston Acoustic RS12's (no idea of the wattage and stuff...)

Headunit:
Alpine CDA-7894
26w or 27wx4 RMS

Any help would be appreciated.
 

Bronze Member
Username: Noblemobile

Van Nuys, CA USA

Post Number: 15
Registered: Sep-04
you need to post more info. need what type of amps & subs to help you.
 

Bronze Member
Username: Heresy209

Post Number: 11
Registered: May-04
Eclipse 3242 Amplifier contain following functions :
50W x 4 Channel 0.04% THD at 4 Stereo, 20-20,000Hz @ 12.5V
ChannelFlex Crossover on Front Amplifier, Rear Amplifier and PreAmp
Adjustable High-Pass Frequency (50-200Hz or 1.5-6kHz)
Adjustable Low-Pass Frequency (50-200Hz or 1.5-6kHz)
Double-Sided PCB
High-Current, High-Speed Output Devices
High-Efficiency, High-Energy MOS FET Power Supply
Audiophile Grade Component Selection
Intelligent 7-Way Discrete Protection Circuitry
Music Reproduction with Low Distortion & Ultra-Low Negative Feedback
Efficient Cooling with Low-Profile Heatsink
Multi-Mode Configuration
Stereo/Mono Switch

Hopefully something in there that'll help, I'll find the info on the subs when I get home.
 

Bronze Member
Username: Heresy209

Post Number: 12
Registered: May-04
This is the only info I can find on the subs.
Boston Acoustics RS-12:
4/8ohm
400w RMS
95 dB
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us