|
Bronze Member Username: Rollout4877Kent, Ohio USA Post Number: 24 Registered: Apr-06 | http://img155.imageshack.us/img155/4377/4ohm4fl.jpg |
|
Bronze Member Username: Troy81Tavernier, Fl Us Post Number: 88 Registered: Mar-06 | well, if its dual 2 ohm, its at 4 if its dual 4 ohm its 8 |
|
Bronze Member Username: Rollout4877Kent, Ohio USA Post Number: 26 Registered: Apr-06 | yeah it a dual 2, idunno why the f***ers wired it like that, how much louder will it be if i wire it to 2 or 1 ohms. im tryin 2 figure out how to do it. heres a diagram. will this work? http://img69.imageshack.us/img69/3663/kickerohms3et.jpg how many ohms would that be with dual 2 ohm subs? and would the wires go to the amp or would they have to connect to the other sub 1st? and does this sound weird... the place solderd the wires into the plug in piece thing thats in my box? |
|
Bronze Member Username: Rollout4877Kent, Ohio USA Post Number: 27 Registered: Apr-06 | bump |
|
Silver Member Username: Demon_prideCrowder, Oklahoma USA Post Number: 118 Registered: Oct-05 | Dual two, wired correctly, can be @ 2 |
|
Silver Member Username: Van_manBoston, MA Post Number: 143 Registered: Mar-06 | Demon, Can you elaborate on wiring up a 2 ohm DVC to obtain a 2 ohm load? Also Looking at the pic you posted Roll out, Only one coil is powered. Coil # 2. Coil #1 is not wired. Coil #1 is just a loop. in the + thru the coil, out the -, thru the jumper back into + If it was wired correctly, It would be If dvc2 =4 ohms or dvc4 =8ohms |
|
Gold Member Username: RovinTrinidad & T... Post Number: 7688 Registered: Jul-05 | http://www.the12volt.com/caraudio/woofer_configurations.asp ...... |
