i want to make the top portion of my box plexiglass is this a good idea??? i can get 3/4 thick plexiglass...reccomended????will this affect the sound???
i think it will be fine. i heard the minimum should be 1/2" so 3/4" should be fine. as far as sound quality i think it wont be affected as long as there are no air leaks. im not sure what you are supposed to glue it with like all wood boxes. that would be another question. make sure you predrill every hole with plexiglass!
first off dont listen to that guy. 1/8" is just stupid. i didnt say to glue it, i was saying i dont know what to use around the edges. i would deffenetly screw it down tho.
use a small drill then go bigger take your time dont rush it then i would put some clear glue on it and screw it down but thats just me im sure you could get away with just screwing it though but it wouldnt be sealed as weell as it would if you use glue
right i probably will seal it with silicone and use sum kind of clear adhesive.but yes i get wut ur sayin take my time and make it look nice....im only making one side plexiglass so i can show off the magnet...also stick sum blue or green neons in the box and make tth sh!t pleasing to the eye at nite....
you could use 3/4 inch plexi and it would be fine.. i would do a double layer of mdf wherever it is going so you can inset the plexi so it is flush with the wood.. use a countersink bit on the plexi and screw it into the mdf.. use clear silicone where the plexi contacts the wood.. maybe even let it set up a little bit before you screw it down.. the silicone will act as a airtight seal
you could use 3/4 inch plexi and it would be fine.. i would do a double layer of mdf wherever it is going so you can inset the plexi so it is flush with the wood.. use a countersink bit on the plexi and screw it into the mdf.. use clear silicone where the plexi contacts the wood.. maybe even let it set up a little bit before you screw it down.. the silicone will act as a airtight seal
ford explorer wit a dcx precicion power 1500.1 well i gave this amp to my cousin so im lookin ofr another amp that can push more my sx than the precicionpower
lilrob. the avalanche had a 9 inch wide magnet. thats larger than the sx magnet by a long shot im pretty sure. and why do you post it EVERYWHERE? i think your inlove with it? did you lube up the hole in the backplate? haha im sorry, couldnt resist.... but you are obsessed with that picture.... its not a boombox, take it off your shoulder and put it back into your car.
btw. id use the thickest plexi you can afford. or lexan. check ebay. sometimes they have like 1 inch by 12x24 for like 20 bucks because its got a chipped corner which you'd cut off anyways.
yeah bro i see u got jokes hahha yeah the avalanche has 9 inch wide but i was talkin about the looks in lokks frikin small too and the size do not matter is the bl or power, btw is already in my car well not cuz i dont have an amp right now
i think its the shocker sig, those 18s have such a huge magnet it doesnt look small one bit lol. somewhere there is a picture of them being used as a coffee table. its bada55