|
New member Username: HypnotiqPost Number: 1 Registered: Jun-07 | I used this amp to power a set of diamond hexes. I didn't use it for too long as I bought it in the midst of changing out my sound system. Pictures available on request. I know i don't have many posts, so i can take a picture of the amp and a piece of paper with my username or any other detail on it. 400+shipping. Brand new prices: http://www.woofersetc.com/index.cfm?...roduct_id=3425 http://www.mobilesq.com/shop/product...products_id=47 These super-flat amplifiers prove that technology "made in Germany" produce exceptional clarity of sound. Compact heatsink sizes, high output ratings and a virtually unlimited range of sound possibilities offer the ultimate in car-hifi pleasure * Power rating RMS/Musik at 4 x 4Ohm at 12 Volt: 4 x 50 Watt * Power rating RMS/Musik at 4 x 4Ohm at 13,8 Volt:4 x 70/140 Watt * Power rating RMS/Musik at 4 x 2Ohm at 13,8 Volt: 4 x 125/250 Watt * Power rating RMS/Musik 2 x 4 Ohm bridged: 2 x 250/500 Watt * Total harmonic distortion: < 0,009% * Signal to noise ratio: > 100 dB * Damping factor: > 300 * Frequency range: 20 Hz -20 kHz +/- 0,2 dB * TIM distortion: < 0,016% * Input sensitivity: 700 mV - 8 V * Fuse: 2 x 25 A * Input impedance: 10 kOhm * Dimensions (H/W/D) in mm: 31,5 x 200 x 336 * Weight net: 2,6 kg * RMI (realmixed input) for forming an optimised mono-summation signal from the left and right channels * Integrated electronic crossover Selectable for woofer or compo systems * HCC HELIX Cross Cards as active frequency modules for individual frequency optimisation * Mono/Bridged/ Stereo switch for channels AB and CD (bridged mode) * 8.0 volt input for connection to any signal source * Power Supply Schaltnetzteil für überdimensinale cont. power rating auf kleinsten Raum * ADC - Anti Distortion Choke to eliminate distortions * Intelligent noiseless on/off switching for the prevention of pop noise, even when various units are interconnected * Intelligent temperature and power controlled switching power supply * Separate speaker protection circuit with current limitation for speaker short-circuiting, cable contact with car chassis, low impedance and wrong connection * SMD Surface Mounting Devices for constant assembling quality * Double-sided, extra strong (2x 110u) and copper plated pc-board for best power and signal transmission and protection against vibrations * 1% accurate components for perfect audiophile sound quality and maximum power * Minimum space requirement thanks to super-flat design (31.5 mm) * 24 carat gold-plated solid connection terminals for loss-free signal and power transmission * plexiglas cover * CPS - Color Protection System * Temperature-optimised heatsink of SiAl alloy for the best possible consistency of performance |