New member Username: Slayer3294
Hammersville,
Ohio
United States
Post Number: 1
Registered: Sep-11
|
Posted on Tuesday, September 06, 2011 - 21:24 GMT remote runs 2 amps off of it, it is hooked to my blue and white remote wire in back of my radio but when i try and turn my car on only my 2nd amp comes on but the first only works when remote wire is not connected so what gives and fyi all fuses have been replaced |
Silver Member Username: Joe1234
Post Number: 378
Registered: May-09
|
Posted on Tuesday, September 06, 2011 - 22:22 GMT So you are saying that the amplifier turns on when you disconnect the remote-on? or you connect the remote-on to say +12V to have the amp turn on?
By the way you could just list models for HU and amps. |
New member Username: Slayer3294
Hammersville,
Ohio
United States
Post Number: 2
Registered: Sep-11
|
Posted on Tuesday, September 06, 2011 - 22:52 GMT yes the amp stays on without the remote on it |
Silver Member Username: Joe1234
Post Number: 379
Registered: May-09
|
Posted on Tuesday, September 06, 2011 - 23:13 GMT If it started doing this on its own then the amp has to be repaired.
If this is a new install and a new amp I would need to have the model of the amp to give you some more feedback. |
Gold Member Username: Kaerfpl
Spencerport,
NY
USA
Post Number: 1364
Registered: Jun-06
|
Posted on Thursday, September 08, 2011 - 03:56 GMT Alright Tanner, I can kindof understand your situation, and it may be possible that the Amplifier really is not damaged. In order for me to give you an opinion on what I think, is there any way you can draw up a picture on how everything is wired, or maybe even take a picture or your setup? |
