|
New member Username: BigwatPost Number: 5 Registered: Aug-11 | the subs that i have are Punch P2 D412 4ohm dvc |
|
Silver Member Username: Joe1234Post Number: 304 Registered: May-09 | This would be a good inexpensive amp: http://www.sonicelectronix.com/item_22705_Hifonics-HFi1000D.html Just wire each of your subs coils in parallel and connect them in parallel to the amp so your total impedance go to 1 ohm. Bigwat also you can continue your old thread, its not necessary to start a new thread every time, in fact it makes it harder to follow up on your questions, just open your old thread go to the bottom and write your next question in the box. |
|
New member Username: BigwatPost Number: 6 Registered: Aug-11 | Thanks, so what amp should I use on them |
|
New member Username: BigwatPost Number: 7 Registered: Aug-11 | Which amp would push them hardner, the punch p6001 or the punch p500-2 |
|
Silver Member Username: Joe1234Post Number: 310 Registered: May-09 | Neither Rockford Fosgate Punch P500-2 or the Rockford Fosgate Punch P6001 will have enough power to drive these subs: Rockford Fosgate Punch P500-2: 4 ohms: 125 watts x 2 chan. 2 ohms: 250 watts x 2 chan. 4 ohms: 500 watts x 1 chan. Rockford Fosgate Punch P6001 325w X 1 @ 4 OHM 600w X 1 @ 2 OHM Still the Punch P500-2 will be better, wired at 4 ohms will give you 500W of the 800W you can put to those subs. You can only wire your subs to 1 ohm or to 4 ohms You need a 1 ohm stable amplifier for these speakers: So for a cheap amp I suggested the Hifonics HFI1000.1D Click on this link to see it: http://www.sonicelectronix.com/item_34507_Hifonics-HFI1000.1D-HFI-1000.1D.html From Rockford Fosgate you would need the Rockford Fosgate T1000-1bdCP Click on this link to see it: http://www.sonicelectronix.com/item_25132_Rockford-Fosgate-T1000-1bdCP.html But as you can see its very expensive. |
|
Bronze Member Username: Dcollister440Post Number: 42 Registered: Jun-11 | you can get them way more inexpensive off of ebay or amazon man...I just got a t1001bd for 200...also caraudioclassifieds.org is a good website to look at for audio stuff |
|
Bronze Member Username: BigwatPost Number: 11 Registered: Aug-11 | thanks, i bought the brutus amp. once i install everything in my car, i will post to let you know how it came out |
|
Silver Member Username: Joe1234Post Number: 333 Registered: May-09 | Bigwat, get the amp's input gain to minimum before turning on.. and never pass half gain, that thing is *really* powerful. Congrats on the purchase that setup will hit hard. |