Installed a jvc unit but lossed my dash spearkers

 

Bronze Member
Username: Msand951

Riverside, Ca Usa

Post Number: 44
Registered: Mar-07
i installed a jvc with the proper harness for my truck a 2003 ram1500 quad cab from crutchfield. but i lost the dash speakers. i reinstalled my factory radio and they work. i checked all my connections. and they are good. the radio only had left front ,right front, left rear and right rear along with power, ground etc. i even bought another harness but i still get the same problem. any tips outthere.
 

Silver Member
Username: Kpa2727

Post Number: 945
Registered: May-07
yea trace your wires to thier colors. the only way they don't work is a bad radio or u are missing a connection. colors aren't fool proof 3rd party sellers arent always right.
 

Platinum Member
Username: Project6

Post Number: 15148
Registered: Dec-03
I know it's quite obvious but have you checked the fader? You wouldn't believe how some folks actually miss that.
 

Gold Member
Username: Bnd_rulez

Phoenix, AZ USA

Post Number: 1551
Registered: Mar-05
Do you have rear speakers that work? Most decks I know put out for 4 speakers, not 6. Could only be front/rear hooks up.
 

Platinum Member
Username: Project6

Post Number: 15150
Registered: Dec-03
Check the color of the wires going to the dash speakers and see if any of those are connected to the harness.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us