Like

Region hack for Accurian portable DVD player APD-3913

 

Carlos-Yanes
Unregistered guest
Does anyone knows how to make the US (Region 1) Accurian portable DVD player APD-3913 (from Radio Shack) region free ??
 

New member
Username: Cherryblossom

Post Number: 1
Registered: Oct-06
I'm sure you've found out what to do by now but just in case, here's the simple solution: POWER UP the player WITH NO DISK INSIDE. Do not go into any menu. PRESS 9653 on the remote control. This will bring up the region menu. Use arrows to HIGHLIGHT 0. Press ENTER to set to 0. Press SETUP to exit. VOILA!
 

New member
Username: Edubbconsul

Post Number: 1
Registered: Oct-06
i need a region code hack for the accurian apd-3298!!!!
 

New member
Username: Trogovaz

Post Number: 1
Registered: Sep-07
Hi !!
I need a region code hack for the Accurian portable DVD player 8" swivel screen Model LMD-6808 (from Radio Shack too).
Does anyone know ??

Tks a lot
 

New member
Username: Bravo2zero

Post Number: 1
Registered: Jan-09
hi!!
i need a region code for my accurian portable dvd player 9" wide screen model 16-680 from radio shack.does anyone know??

thanks....
 

New member
Username: David1957

Post Number: 1
Registered: Jan-10
I need to know how I can make my Accurian portable dvd player Cat.no 16-136 A region free
 

New member
Username: Swogee

San Luis Obispo, CA USA

Post Number: 1
Registered: Feb-10
Here are the steps to make an Accurian 16-136 portable DVd player region free.

1) Turn on the DVD player without a DVD inside the player.
2) Press the SETUP button on the remote control (a "Setup" screen will appear).
3) Use the right/left arrow keys to navigate to the "Preference Page".
4) Next use the up/down arrow keys navigate down to the "Disc Menu".
5) Enter the code 9653 using the remote numeric keypad.
6) A screen will then be shown that has the unit model number, the date and time the unit was manufactured, and the region code.
7) Use the up/down arrow keys to change the region or set it to "0" for region free.
8) Press the enter button to save the changes.
9) Press the SETUP button on the remote to exit the "Setup" menus.

I hope this helps.
« Previous Thread | Next Thread »

Add Your Message Here

Bold text Italics Create a hyperlink Insert a clipart image Add a YouTube Video
Need to Register?
Forgot Password?
Enable HTML code in message
   

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us