How to remove the Back panel on a Visio VMM26 Monitor

 

New member
Username: Karcov

Post Number: 1
Registered: Jul-11
My beautiful monitor died, After running some trouble shooting, I determined that It is most likely the inverter board, or the capacitors on it, that have gone bad. To save some money, I thought I would replace the Caps myself. However I have hit a snag; In the fact I can't get inside the monitor. Like most others It has a few screws and some tabs along the bottom side, I can get as far as popping the bottom side away from the back panel, but the sides are extremely tight, will not pop out. So if any one knows how, or knows a tutorial on removing the back panel it would be very helpful.
 

New member
Username: Maxepotter

Post Number: 7
Registered: Oct-10
The VMM26 monitor is a new flat panel multimedia display from Vizio. From looks to features, the VMM26 is very impressive. The LCD monitor is glossy with an anti-glare coating and an anti-scratch coating on the plastic part. This lends a soothing effect to the eyes even if the room lights are dimmed or the backlight glow is increased.
The Vizio VMM26 LCD is balanced on a stand at a height of 4" from the ground.
« Previous Thread Next Thread »

Add Your Message Here

Bold text Italics Create a hyperlink Insert a clipart image Add a YouTube Video
Need to Register?
Forgot Password?
Enable HTML code in message
   



Main Forums

Today's Posts

Forum Help

Follow Us