Need to run a 100 ft digital cable to connect comp to amp


New member
Username: Phatredhead

Post Number: 1
Registered: Jan-05
I need to run a 100 ft or so of cable to connect my computer spdif out to the spdif in on my amp 100 ft away, some say run 16 0r 18 gauge speaker wire and put rca connecters on the ends. Will this result in single lose so great that the single will not be constant (i.e. cut in and out). Should I consider running rg6 cable and putting compression ends on the rg6 (don't know much about this option) any other thoughts.
Will the sampling rate 96 KHz or 48 KHz affect the single loss? Please provide lots of info thanks

Unregistered guest
The RG6 with 75 ohm compression connectors are the ticket. The sampling rate will not effect it.

« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us