INSTRUCTIONS

1) Connect your RS232 Cable(straight thru not null modem) from your Multi-Star to your computers comport.
2) Make sure your Multi-Star is off and that you see nothing on the front of your
Multi-Stars display.
3) Click on the Mnp.exe Icon.
4) You will see the program below. CLICK “Update program Now!”


Option No.1 X-8500_041202_235f_VeM This will over write and convert your Multi-Star into a PANSAT 2500A


Optiom No. 2 Al7bar Ultra 247 120204 keys This will over rite and convert your Multistar into a Fortec LIFETIME ULTRA 

5) Browse and Select  file you wish to load to your Multi-star receiver(optio 1 or Optiomn 2).
and click on the “Open” button or double click on it.


6) Quickly turn power on and the unit will load up the new software. 
DO NOT INTERRUPT THE PROCESS. Wait until your receiver powers
it self up or you will damage your unit!


NOW YOUR RECEiVER IS A PANSAT 2500A if you chose Option No.1 or a FORTEC LIFETIME ULTRA if you chose Option 2.



IMPORTANT . YOU NEED TO SET DEFAULT KEYS and check tha key cobe function is ON.

PANSAT  
1- Check key Code Function: MENU-Scroll to parental control-OK-Scroll to second PIN-enter 0000- check if Key EMU function is ON, if OFF-scroll down-then right arrow to ON,then exit, exit, exit. If ON go to step 2
2- SET DEFAULT KEYS: MENU-Scroll to parental control-OK-Scroll to second PIN-enter 0000- Scroll to Set Default Keys-Press OK- exit-exit-exit

FORTEC
1- Check key Code Function: MENU- Right Arrow three times-Scroll to code -OK-enter 1668- check if KeyCode Funtion is ON, if OFF-scroll down-then right arrow to ON, exit, exit, exit. If ON go to step 2.
2- SET DEFAULT KEYS:  MENU- Right Arrow three times-Scroll to code -OK-enter 1668-Scroll to Set Default Keys-Press OK- Then exit -exit -exit 
        
Now you need to go to INSTALLATION MENU and ANTENNA SET UP and change setting that correspond to your LNBs and Switches. Then scan your sats OR LOAD a premade channel list with gtool (check your antenna setting)

For setting and channel list search the forums

FOR NOW ON YOU CAN USE PANSAT OR FORTEC LOADERS and UPDATES