Ariza

1- Press Green button
2- Red button
3- Red button
4- Menu button
5- Press right arrow several times until you see nagravision
6- Now depend on the key that changed and it is active you must scroll down til proper key to be changed

Example: On 06/09/05 ECM key 01 is active. Scroll down to provider 000101 01 key line and enter xx xx xx xx xx xx xx xx (enter number with your # button in your remote and for letter follow code definition button on your TV screen)
7- Press OK for 5 seconds.
8- Exit,exit...........


700

1- Press Menu
2- Scroll Down to Parental Control, Press Enter
3- Press "i" key on remote, then enter pin number "2004"
4- Scroll down to Set Default Key, Press Enter
5- Scroll up to Nagravision, Press Enter
6- Press VOL Right twice, you will see Dish Network
7- Press CH Down once, then VOL Right Twice, you will now see Nagravision 2 displayed top left
You are now at the key 00, Press CH Down once so you can edit the Key Data
9- Enter your new keys (write down the old ones to be safe)
10- Press Ok to store, then repeat with key 01
11- Press exit until you get back to tv, all channels will be available



Buzz

press MENU
press ENTERTAINMENT
press 7890
enter manual key

10 xx xx xx xx xx xx xx xx xx |
11 xx xx xx xx xx xx xx xx xx | <-- key 0 here

20 xx xx xx xx xx xx xx xx xx |
21 xx xx xx xx xx xx xx xx xx | <--key 1 here



Captain

1) Press EXIT button twice
a Keys window will open "Current key info."
to the right of the word "Index", you'll find the active Key to be changed
so...Index: 0x00000001 means key01 is active
Index: 0x00000000 means key00 is active

2) Press yellow button.
Enter first half of key string. When you're done, go down to OK, and press. You'll be asked "Wish to save changed data?" YES (OK button)
Push Yellow button again. Enter the second half of key string. Go down to ok. Save changed data. Now you're back to Keys window.

3) Push exit button



Conaxsat

CNX-V1

Menu + 9999
Key Manager, OK
System, OK
Provider, OK
Key Index, OK
Go down to the appropriate field and hit OK
Use your arrows to navigate and enter codes.

Duo/Trio

Menu
Scroll left to Keyworks
OK
Enter the Menu's by pressing OK
Enter the keys as needed with the buttons as instructed on screen.
Press ok on the options to save.
Use your arrows to navigate and enter codes.
Basically the OK button is your access into the menus. Pressing it on different options brings you to the next.
To go back press exit.



CaptiveWorks

500s/600s/600s Premium

After the patch has been enabled:
Main Menu-->Installation-->Patch Menu
or
1- Go to a scrambled channel for that provider.
2- Press PAGE DOWN on remote
3- Press RED button on remote
4- Enter the current active key (for letters use CH UP/DOWN keys on remote and OK)
5- Select "ok" (under F) and press OK on remote ..at this time you'll have video and sound
6- EXIT



Coolsat

4000 / 5000 / 6000

Enter 8282 with remote as if choosing channel to open CAS Menu.
Use volume up and down button on remote to scroll to Nagravision Provider Id.
Use channel up and down button on remote to scroll to different Key Slot IDs and Key Slots.
Enter the keys.
(Use the Info button for letters A-F . Press it once for A , twice for B , Etc and channel number key pad for number entries Or you can press OK and it will open a Keyboard selection type menu to enter keys.)
When key change is complete, Press Exit and confirm key change save.

[10] XX XX XX XX XX XX XX XX <-- first half of key0 (86) here
[11] XX XX XX XX XX XX XX XX <-- second half of key0 (86) here

[20] XX XX XX XX XX XX XX XX <-- first half of key1 (96) here
[21] XX XX XX XX XX XX XX XX <-- second half of key1 (96) here


8000/8100

Press menu
Press Advanced
Then press 1234
Choose Nagravision
Enter Keys (see sample above)
Exit and Save



Digiwave

1- Press MENU
2- Scroll down to System Setting.
3- Press OK. If you see a red dot in the botton/left of your screen, go to step 5
4- Enter number 1004. A red dot will come out at ur bottom left. YOU DO NOT NEED TO DO THIS STEP w/ lastest bins.
5- Press red button (audio).
6- Press right arrow until NAGRA appears in the first line.
7- Down arrow up to Provider and right arrow up to 0001.
8-Now scroll down to first key line and press OK. scroll to the letters and number and enter Key 00
9-Scroll down to second key line, press ok. and enter key 01
10- Scroll To Save Key
11- Press OK
12- Exit and Enjoy



Extremeview

Magnum

Go to the main menu
Select the Embedded CAS and choose softcam.
Select the set of keys that you want to update (01 OR 00), Provider Name, Provider ID & Provider Index.
Select the set of keys that you want to update (00 OR 01)
Using the on-screen keyboard, type in the new keys
Once you have completed the new key entry, click on the update green button on the remote and then select yes to update button.
Exit and watch tv.



MVidea

Press menu
Enter = 8888 and the code edit menu appears
Press the blue button for more
Press the yellow button for nagra2
Enter Keys
Exit and Save



Neusat

SP6000 / SP6000 Premium

1- Press zero on the remote and that will take you into the menu where the keys are.
2- Set Encryption system (nagravision for dish or bev) by scrolling left or rite with the remote.
3- Then scroll down with your remote to the provider name.
4- Press OK button once on the provider you wish to put keys in for. This will take you to the keys.
5- Scroll to the line you want to edit and push the blue button and a box will pop up for you to put the keys in on the line you highlighted.
(the key number will be at the top that you are editing so when you scroll to the first number or letter you want to change push ok then the next number or letter you want push ok and so on and so on until you have the whole key changed to the numbers you want)
6- After you get the keys all put in for the line you are editing push done and it will save it.
7- push exit and watch tv
To set keys at default after loading a binfile:
1- push the zero on your remote control
2- the keys menu will pop up. and at the top in the CA System line it should be on nagravision, if not scroll left or right untill you see nagravision. then push the blue button on your remote and it will be set at default.
3- push exit button and wait untill it finds the keys and watch tv.



Orasat

1- Press 6969 with your Orasat remote control.
2- Press COLOR BUTTONs for desired CAS(Video Encryption) on your remote.
(Red for SECA, Yellow for Viaccess,Green for Irdeto, and Blue for Nagravision)
3- Now you are in Code Edit Screen.
Provider C10100 is BEV and 010100 is DN as you can refer following figures.
Number 1 & 2 are BEV Nagravision 2 Key values. (Index 00 & 01)
Number 3 & 4 are DN Nagravision 1 Key values. (Index 00 & 01)
Number 5 & 6 are DN Nagravision 2 Key values. (Index 10 & 20)
4- Once you choose Provider and Index to change Key value, press OK button.
Then small pop-up screen comes out for entering new key.
5- Enter index and new key using the number pad on the remote or the on screen key pad. 


 Sonicview

SV1000 / 4000

press MENU
press ENTERTAINMENT
press 7890
enter manual key

10 xx xx xx xx xx xx xx xx xx |
11 xx xx xx xx xx xx xx xx xx | <-- key 0 here

20 xx xx xx xx xx xx xx xx xx |
21 xx xx xx xx xx xx xx xx xx | <--key 1 here


PVR1000 / SV8000HD

Hit Menu
Enter 7890 to enable the code menu
Hit Code
Enter updated keys
Save
Watch tv.



Pansat & Clones

Pansat 2500, 2700 & Clones of

press MENU
press Parental Control
press Second Pin and enter 0000
press NAGRAVISION 2
scroll to your desired Provider
enter Key Data for Key Number 00 (aka 86)
Press OK to Store
Scroll up to Key Number field and then right arrow to change to 01
enter Key Data for Key Number 01 (aka 96)
Press OK to Store
Exit out and your done



Satopia

Press Menu
Press Red Button
Enter keys carefully in each line.
Exit and save.



Satpros

While watching tv on a scrambled channel, enter 6969
Press blue key on remote control
Use channel down, scroll down to provider number index 10
Press ok
Enter (10) xx xx xx xx xx xx xx xx
Press ok

Scroll down to provider number index 20
Press ok
Enter (20) xx xx xx xx xx xx xx xx
Press ok

Scroll down to provider number index 11
Press ok
Enter (11) xx xx xx xx xx xx xx xx
Press ok

Scroll down to provider number index 21
Press ok
Enter (21) xx xx xx xx xx xx xx xx
Press ok
Press exit and watch tv!!



Spacestar / Sonysat

Press Menu
Choose Configuration - Embedded Cas - Nagra 2 - Then press idea Dish Part1.
There you will see F1 & F2
Update F1 with the first half of the new key.
Update F2 with the second half of the key.
After updating the keys, press "EPG" to save then press "EXIT" and watch tv!



Viewsat

Viewsat Lite/Plat/Extreme

press MENU
press INSTALLATION
press CODE
press NAGRA
scroll to your desired Provider
enter manual key

08 xx xx xx xx xx xx xx xx xx |<-- first half of key 0 (86) here
09 xx xx xx xx xx xx xx xx xx | <-- second half of key 0 (86) here

88 xx xx xx xx xx xx xx xx xx |<-- first half of key 1 (96) here
89 xx xx xx xx xx xx xx xx xx | <--second half of key 1 (96) here


Ultra / PVR7000 

press MENU
select User Setting
select CODE MENU
in CAS select NAGRA
scroll down to next box and select your desired Provider
enter keys (see sample above)



Xrica

Press Menu
Choose Installation.
Choose Key Edit.
Enter keys carefully in each line.
Exit and save.