Recently i inherited my grandfathers 76' cadillac and it has a HUGE trunk..anyway, im definately going with kicker comp vr's (great performance for the price), but im having trouble deciding what setup to do. without making it too obtrusive, i can get about 5 cubic feet of space (give or take). looking at the comp vr specs, i have the following options.
leave it one big space: 5 cubic feet divide into two-2.5cu ft divide into three- 1.66cu ft divide into 4- 1.188 cu ft.
Comp VR specs: (box sizes in cu ft) 10" 300rms: min sealed-.8, max-3, min port-1.25, max-1.75 12" 400rms: min sealed-1.0,mav-4.6, min port-1.75,max-2.25 15" 500rms: min sealed-1.8,max-5.2,min port-3.0,max-5.0
For this project i recently bought a Concept cc-d1200 (1200watt rms at 1ohm).
So looking at those options i came up with the following options:
4 sealed 10" at 1.188 cu ft 3 sealed 12" at 1.66 cu ft 2 ported 12" at 2.5 cu ft 2 sealed 15" at 2.5 cu ft
Now im definately looking for SPL, i have a jl 12w3 in my current car (2000 chrysler concorde) with a sealed box, but id definately like something louder for this new car. Spl is good, but also maybe a slight balance with some sq would be nice. Ive been toying around with the various box building programs (still learning to use/understand them), but thought maybe you guys would be able to help out some with this situation. I've built a few boxes before, but never was faced with a situation like this. I simply worked with the sub's box specs.