Punch HE

Cory Choate Bronze Member Username: Daven Post Number: 11 Registered: Jun-04	Posted on Wednesday, June 02, 2004 - 21:36 GMT Thinking about getting a Punch HE sub, but i noticed it has 8 OHMS Impedance, would this creat any touble with most amps?
Patrick Lorenz Silver Member Username: Pat_l Tucson, AZ USA Post Number: 190 Registered: Apr-04	Posted on Thursday, June 03, 2004 - 03:39 GMT You can get HE in 4 ohms as well.
Michael Wasyliw Bronze Member Username: Alpinepower Canada Post Number: 37 Registered: Jun-04	Posted on Tuesday, June 08, 2004 - 03:50 GMT 8 ohms would require a 4 channel bridged amp per sub, can it not also be wired for a lower impedance>
David Sugg Bronze Member Username: Davids2004 Houston, TX USA Post Number: 32 Registered: Jun-04	Posted on Tuesday, June 08, 2004 - 03:53 GMT With the 8 ohm he you would be able to run both positive to positve and negative to negative and be able to use a 2 channel amp for a 4 ohm load.
Jonathan Silver Member Username: Jonathan_f GA USA Post Number: 273 Registered: May-04	Posted on Tuesday, June 08, 2004 - 04:02 GMT If you get two 8 ohm subs, and wire them in parallel, it'll create a 4 ohm load. That works well if you plan to get a 2 channel amp and bridge it. If you plan to run a mono subwoofer amp, then you should get 2 4 ohm models to create a 2 ohm load, as that is what most mono amps are optimized for.