|
New member Username: RazvanroPost Number: 1 Registered: Mar-06 | can anywone know haw to boost the range of my viper 5000 because if I give a command my car will do but the pager doesn't receive back the signal for confirmation |
|
Bronze Member Username: Ruthless06Post Number: 87 Registered: Feb-06 | If you give the command, like to say, remote start, and it remote starts. But your 2 way system doesn't let you know. Then it could be a few things. Either the two-way transponder system has faulted out. The remote could be bad. One of the wire in your antenna could have shorted. Or maybe the brain isn't sending a signal. I would try to get a new remote and try that first. |
|
New member Username: FadmaidPost Number: 1 Registered: Jul-06 | i have a big problem! i have a viper alarm on a ford transit. and i think so because my remote says so. fcc id:ezsdei 474v; rpn 473v. sometimes my alarm deactivates silenly by ITSSEFL! and today insead of two beeps on the deactivation it gave my like 4 or 5. can i fix those problems? how do i eve fiind out my alarm series? thank you very much. |
|
New member Username: Justin27Jackson, NJ USA Post Number: 1 Registered: Jul-06 | i have a big problem i sent my remote through the wash so i can not deactivate my alarm i used to be able to bypass this now i cannot figure it out and i need to program a phython remote to it ....any suggestions? email me at Jtownkid17@hotmail.com ...thanks |