When hookin up an amplifier...

 

Gold Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 1305
Registered: Oct-05
when u ground it, do u usually use somthin to hold it down to the bare metal??

and wut are the gray wires? they are pos and neg somthin, because they have a red and black tape on them... wut is this and where does it go?
 

New member
Username: Jirvin_82

Post Number: 2
Registered: May-06
Drill a hole and use a bolt and nut to hold your ground cable to bear metal. I have never seen an amp with gray wires. Are they coming out of the amp?
 

Gold Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 1329
Registered: Oct-05
I got the prob. fixed.

wouldnt it be bad to pinch the ground wire like that?
 

Gold Member
Username: Theelfkeeper

Stockbridge, GA USA

Post Number: 2274
Registered: Feb-05
it can be bad to pinch any wire. that can create a voltage drop and cause problems.
 

Gold Member
Username: B101

Queen City, NC USA

Post Number: 2980
Registered: Sep-05
ground is the wire u least have to worry about.. so u dont even need insulation on your ground wire, unless u are runing it side by side with positive...
I would'nt worry too much about pinchin the ground, but I would worry ALOT about pinchin any other wire...
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us