|
New member Username: ToyotagurlDeBerry, Texas US Post Number: 1 Registered: May-06 | I was wondering if I can connect two 15" subs to a mono channel amp? It only has a connection for 1 sub, but can I do a crossover? |
|
Bronze Member Username: JohammbassCork, Cork Ireland Post Number: 87 Registered: May-06 | Yes you can, but the thing is you have to do it right and know if the amp has enough power to push two of those subs |
|
New member Username: ToyotagurlDeBerry, Texas US Post Number: 2 Registered: May-06 | Thanx Maris!!! It is an 800 watt amp and the 2 subs are 500 each! |
|
Gold Member Username: TheelfkeeperStockbridge, GA USA Post Number: 2190 Registered: Feb-05 | that depends on the VC configuration of the subs. that will determine the load you put on the amp, which will affect the amp's output. lower the impedance, higher the output, higher the impedance, lower the output. but you have to stay within the amp's limitations. most can't go below 2 ohms. |
|
Bronze Member Username: B_sonPost Number: 33 Registered: Apr-06 | heres the wiring diagram http://www.crutchfieldadvisor.com/learningcenter/car/subwoofers_wiring.html?subs =2&impedance=DVC4x2 |
|
Bronze Member Username: B_sonPost Number: 34 Registered: Apr-06 | or... http://www.crutchfieldadvisor.com/learningcenter/car/subwoofers_wiring.html?subs =2&impedance=DVC4x2 amp must be 1 ohm stable though |