Question on setting gains continued


New member
Username: Trunkslayer


Post Number: 1
Registered: May-06
I recently read the page about gain setting with 33 hits, And it was said that to set your gain you should match the hu preouts. My question is when I set my amp I read about it at different sites and they said to turn all settings to flat, eqs all of it. So I did, then turn your hu up to its highest distortion free point, I did that by going to distortion then back tracking till it was gone. Then they said start your amp from highest voltage and turn till it distorts which I did that also, with bass boost at between 5 and 6 db and sensitivity at .3v to me it sounds very clear and powerful eventhough hu suggests 2.2v, so what is the deal please help me

Silver Member
Username: Sw9152


Post Number: 550
Registered: Feb-06
the hu is prolly capable of putting out 2.2v at full volume but doesnt do it at lower volume levels.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us