Silver Member
Username: Dustin3 Tigard,
Or
U.S.
Post Number: 297 Registered: Oct-05
Posted on
Thursday, January 19, 2006 - 16:33 GMT where should i?
Gold Member
Username: Insearchofbass Post Number: 4282 Registered: Jun-04
Posted on
Thursday, January 19, 2006 - 16:41 GMT well if your running a fmod from harrison labs they go in the rca's of the amplifier
Silver Member
Username: Dustin3 Tigard,
Or
U.S.
Post Number: 298 Registered: Oct-05
Posted on
Friday, January 20, 2006 - 15:51 GMT what? there is a name called "subsonic" and then there are two brackets, one branching off to the left going to a on/off switch and then on right side it shows a button you turn that goes from 20-50? should i have this on? and what should i set it at?
Gold Member
Username: Insearchofbass Post Number: 4307 Registered: Jun-04
Posted on
Friday, January 20, 2006 - 15:55 GMT is your box ported or sealed if its ported you turn the subsonic just below your ports tune frequency
Silver Member
Username: Dustin3 Tigard,
Or
U.S.
Post Number: 300 Registered: Oct-05
Posted on
Friday, January 20, 2006 - 21:10 GMT its ported... and my port is tuned to 38 hz... so would i tune my subsonic to 35??
Silver Member
Username: Rzarector Coquitlam,
Bc
Canada
Post Number: 851 Registered: Dec-04
Posted on
Friday, January 20, 2006 - 23:26 GMT yes
Silver Member
Username: Dustin3 Tigard,
Or
U.S.
Post Number: 301 Registered: Oct-05
Posted on
Saturday, January 21, 2006 - 02:29 GMT and what about the HPF? i dont have an on/off button for it so should i just turn it all the way counterclockwise?
Silver Member
Username: Dustin3 Tigard,
Or
U.S.
Post Number: 307 Registered: Oct-05
Posted on
Saturday, January 21, 2006 - 06:31 GMT bump
Gold Member
Username: Insearchofbass Post Number: 4309 Registered: Jun-04
Posted on
Saturday, January 21, 2006 - 14:31 GMT you want the low pass filter on set to about 80 hz or lower depending then the high pass filter should be off as a result the subsonic should be right below the 38 hz tune better to be safe than sorry