0/1 Gauge Wire

SeanC31 Unregistered guest	Posted on Saturday, December 17, 2005 - 05:25 GMT Where can I get a tool or something to strip it? Also, where can I get a tool to crimp it? Thanks alot.
charlie Silver Member Username: Redliner Wilmington, Ma Post Number: 169 Registered: Jun-05	Posted on Saturday, December 17, 2005 - 05:27 GMT just use a knife to strip it and use a vise to crimp it
SeanC31 Unregistered guest	Posted on Saturday, December 17, 2005 - 05:30 GMT ok cool for the stripping....but I dont have a vise so what else could i use..Thanks
charlie Silver Member Username: Redliner Wilmington, Ma Post Number: 170 Registered: Jun-05	Posted on Saturday, December 17, 2005 - 05:35 GMT umm do you own a pair of channel lock pliers you could try that it would be hard though but besides that you might have to go to someone lese cause i used channel locks and a vise so i dont know
ty mutlow Silver Member Username: Tjmutlow Post Number: 434 Registered: Sep-05	Posted on Saturday, December 17, 2005 - 12:48 GMT Since no vice, I put it on ground take a heavy hammer and do it that way, then i cover the ends with plastic cpas or tape.
marshall white Gold Member Username: Southernrebel Monroe, Louisiana USA Post Number: 1808 Registered: Mar-04	Posted on Saturday, December 17, 2005 - 20:43 GMT the hammer idea works....i should know i used a hammer, welding lugs, and heat shrink.
Brandon Silver Member Username: Theelfkeeper Stockbridge, GA USA Post Number: 687 Registered: Feb-05	Posted on Saturday, December 17, 2005 - 21:01 GMT hammer and center punch works great. yeah, make sure you cover the ends with heat shrink tube or tape like suggested above.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us