Re sx subs

 

Silver Member
Username: Bestmankind

Los Angeles, CA USA

Post Number: 276
Registered: Oct-05
do these subs require large cuft for it to sound good. i am thinking about a setup with either 2 12 resx or one 15 resx. if 1.7 cuft is good for these subs then i can go with 2 12s but if not i would have to go with 1 15. also to power these subs i am thinking rockfor fosgate power T20001bd. it's 2000wrms @ 1 ohm.

any input is appreciated.
 

Bronze Member
Username: Baseball1187

Columbia, SC

Post Number: 86
Registered: Dec-04
Well... if you wanted to do 2 12s you would have to get them custom dual 4 ohm to result in a 1ohm load. I think you'll be happy though with 1 15" getting about 1000w.
 

Silver Member
Username: Thigpen

RVA, Va Usa

Post Number: 240
Registered: Sep-05
would one 12" sx be louder than 2 12" type R's that were only getting 300rms a piece?
 

Silver Member
Username: Bestmankind

Los Angeles, CA USA

Post Number: 277
Registered: Oct-05
i didn't think about that baseball. so re can do that for you? i mean make it dual 4ohm. what do you think about the fosgate amp for that baseball? if you have suggestions on other amps i would appreciate it.

matt i have a 1200wrms amp putting power to two type Rs and they are loud as hell. and i just changed the box from slot port to sealed and the sealed sounds alot cleaner. its also pretty loud too.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us