What do you think about this amp for:
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 22 Registered: Jul-05 | what do yall think about this amp to power 2 RE SE's 10in i think they are like 600rms apiece, and 1200 watts max apiece, and they are dual 4 ohm voice coils:  * High current operation * VU meters (power level) * Cooling fans * Line output For system building * Gain control * Power and Protection LEDs * MOSFET Power supply * Max power: 3000w * RMS power, 4ohm@.01% THD: 350w x 2 * RMS power, 2ohm: 700w x 2 * RMS power, 1 ohm: 1000w x 2 * 1/2 ohm Stable stereo Power: 1500w x 2 * Frequency response (+/- 3dB): 9Hz to50kHz * Signal-to-noise ratio: >105dB * Channel separation: >90dB * Low pass Crossover: 50Hz-100Hz * High pass Crossover: 120Hz-720Hz * Bass boost: 0-+18dB * Bass boost Frequency: 50Hz-100Hz * Dimensions, LxWxH: 20 1/8" x 13 3/8" x 2 3/4" |
|
Bronze Member Username: Bigred2069Post Number: 58 Registered: May-05 | who makes that |
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 23 Registered: Jul-05 | BOSS |
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 24 Registered: Jul-05 | does ne one think it would be good |
|
Silver Member Username: Mike_anthesCanton, SD USA Post Number: 198 Registered: Aug-04 | no its not a good amp...heres a suggestion...when you put so much money into subs try to match that money into an amp... |
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 25 Registered: Jul-05 | what amp do you recomend |
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 26 Registered: Jul-05 | what about this amp:  1 Ch. 4 ohm RMS - 900 2 ohm RMS - 1400 Mono RMS - 1800 Bridged Max - 2400 Dimension W x H x D - 15 x 2.25 x 11 Hi Speed Digital Circuit Fully Regulated PAM Power Supply Full Selectable Crossover Hi/Full/Low Four Way Protection Circuit 1 Ohm Stable Stereo Bridging Synchronization Variable Low Pass 50Hz-150Hz Variable Subwoofer EQ @ 45Hz Phase Switch 0-180 Remote Dash Mount Low Level Gain Control with Cable Frequency Response : 15Hz to 150KHz S/N Ratio :100dB THD : 0.5% System Distress Indicator Inputs Sensitivity : 200 mv - 8V Dual Mono Speaker Output Connectors Gold Plated Heavy Duty Power & Speaker Terminals. |
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 27 Registered: Jul-05 | see but the crazy thing is, is that this amp right here is pretty bad azz:  ·Mono Block Subwoofer Amplifier ·1 Ohm Stable ·MOSFET Power Supply ·PWM (Pulse-Width-Modulation)System ·Glass Epoxy PCB ·Gold RCA Inputs ·Custom Terminal Block for Speaker ·Connection ·Thermal,Overload and Short Protection ·Variable Subsonic ·Filter ·(15Hz~40Hz,24dB/Octave) ·Phase Control 0-180 degree ·Remote Bass Control ·I·nput Impedance :10K Ohms ·Soft Turn On/Off ·Advanced Protection Circuitry ·S/N Ratio:?90dB ·Heavy Duty Power Coated Heatsink ·Dimensions:11"(W)x 2"(H)x 17"(L) |
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 28 Registered: Jul-05 | or what about theis amp:  1x600W RMS at 4 Ohms ·1x1800W RMS at 2 Ohms ·1x3600W MAX at 1.3 Ohms ·Mono Block Subwoofer Amplifier ·1 Ohm Stereo Stable ·MOSFET Power Supply ·PWM (Pulse-Width-Modulated) System ·Double Sided Epoxy PCB Circuit Board ·Gold Plated RCA Inputs ·Custom Terminal Block for Speaker ·Connections ·Thermal, Overload & Short Protection ·Variable Low pass Filter ·(50Hz~150Hz,24dB/Octave) ·Variable Subsonic Filter ·(15Hz~40Hz,24dB/Octave) ·Phase Control 0-180 Degree ·Remote Bass Level Control ·Input Impedance:10K Ohms ·Soft Turn-on/Turn-off ·Red Lighting Illumination ·Side Leg Mounting ·THD: <0.1%.>90dB ·Input Sensitivity : 200mV ~8V ·Freq. Response : 15Hz ~ 150KHz ·Patent Pending ·Heavy Duty Power Coated Heatsink ·Dimensions : 8.6''(W) x 2.74''(H) x 15''(L)(CAN THIS SUB BE ABLE TO RUN THOSE TO SUBS OFF OF IT) |
|
Silver Member Username: Iufan4lifeulLouisville, Kentucky Post Number: 285 Registered: May-05 | Stay away from Pyle, lanzar, legacy, Boss, Sony, etc. just to name a few. You are going to have to put some money into it for a good amp, here is a suggestion... Kicker 1200.1 would be PERFECT. Also an Ed nine.1 would run them perfect. The Ed nine.1 costs about $350 and is the cheaper of the 2. |
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 29 Registered: Jul-05 | out of the 2 that u told me about which is better and howw much is the kicker |
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 30 Registered: Jul-05 | i found the kicker 1200.1 amp on ebay for 300 bucks!!!!!!!!!! thats not bad at all |
|
Silver Member Username: FfxdevilarmsDubuque, Iowa United States Post Number: 737 Registered: Jul-04 | Are you fooling with us Antonio???? Seriously, how could you possibly pull 4 krappy amps out like that and ask us if they were good. Try the search option on this board and google if you wanna know if a brand is good. You can get the kicker on ebay for only 315, and i would go with kicker instead of the ednine.1 because i have heard that there are build quality issues with the ednine's. Plus its cheaper. |
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 31 Registered: Jul-05 | hay man im sry but im new at this man i dident know if they were good or what, like i said man im new at this this is going to be my first system |
|
Silver Member Username: FfxdevilarmsDubuque, Iowa United States Post Number: 739 Registered: Jul-04 | Sorry man, it just seemed kind of like a joke post the way you kept throwing amps up without a response from other people. Get the kicker if you want a GOOD amp and the RE's. Anything RE is fantastic. RE does make an amp that putts out 1200 watts at 1 ohm ya know. I think when you get the subs you should ask how much the amp costs, it is the 12.1. |
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 32 Registered: Jul-05 | i dont think that there amp will work but its kool i think im gunna get the kicker do you think this sub system will rock my 1978 El Camino |
|
Silver Member Username: FfxdevilarmsDubuque, Iowa United States Post Number: 740 Registered: Jul-04 | what do you not think their amp would work???????????????????????????????????????????????????????????????????? |
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 33 Registered: Jul-05 | i thought it dident have enough power |
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 34 Registered: Jul-05 | ok never mind how much is it i see that it does now |
|
Silver Member Username: FfxdevilarmsDubuque, Iowa United States Post Number: 741 Registered: Jul-04 | It puts out 1200 at 1 ohm, which would give each sub 600 watts. That would be a perfect amp, and it would look cool next the SE's to boot. |
|
Bronze Member Username: 78elcaminomanDallas, Texas United States Post Number: 35 Registered: Jul-05 | do you think the RE SE's 10in subs, kicker/RE amp will make my sub system rock my el camino |
|
Bronze Member Username: UcfsaxmanOviedo/orlando, Fl Post Number: 68 Registered: May-05 | Ya it should SQ should be real good but it won't sound insanely deep like 18's they are 10's after all. If what you want is clean acurate tight bass then you will be pleased. |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics