I have a Viper 480xv alarm system fitted and I would like to find out how you connect up the turbo timer function? I beileve this function to be the channel 3 output on the alarm which from the manual states...
"A 30 (60, 90) second timed output will send a signal for 30 seconds when Channel 3 is pressed. This output can be turned off during the 30-second period by pressing Channel 3 again"
I believe this is what im after but do i connect this to a relay or what? The wire i need to connect to something is this one...
"H1/9 WHITE/BLUE 200 mA (-) channel output 3 This wire provides a (-) 200 mA output whenever the transmitter button(s) controlling Channel 3 is pressed."