Amp\Sub questions

 

New member
Username: Zero43

Kyle, TX USA

Post Number: 1
Registered: May-05
This is mainly regarding MTX brand subs\amp.
On their amps what does dynamic power really mean as well as the subs peak musical power.

Also would it be safe to step up from an 801d and up to either a 1501d,81000d, RF1500bd, phoenix gold xenon15, or an RF 1000bd. Which one would be better to use
 

New member
Username: Jslafarr

Colorado Springs, CO United States

Post Number: 1
Registered: May-05
hey i have 1 300W alpine amp for my 4 fosgate speakers and 1 precision power 600W amp for my 2 12" kenwood subs but im not sure how to wire it all together to make it work..do i ground both amps or put them both to the battery or do i wire one amp to my alpine deck?? if anyone knows how to hook this up please hook me up
 

New member
Username: Zero43

Kyle, TX USA

Post Number: 2
Registered: May-05
This is just my opinion on how to do it But I would run a 4ga power from the battery to the amps add a fused distribution block and run two 4ga to 8ga power wires to each amp. Your best option would to ground each amp seperatley but you can ground them together using another distribution block and a 4ga wire.
I hope that answers your question
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us