Sub help


New member
Username: Limppimpin

Post Number: 1
Registered: May-05
I have 2 visonik v109d6 10in 1200w peak 600w rms subs and im working on making an encolsure for the. what i want to know is if i should go ported or sealed (they will be in a trunk). also they say the max size for a sub box for them is .65cuft so is the max size for a box for 2 subs 1.3cuft or can i go bigger. also for wiring them i can use series/parallel @6ohms or parallel @1.5ohms wich is better.

also i could you sujest what type of amp to runs the 2.


Gold Member
Username: Subfanatic

Walton, Ky

Post Number: 3234
Registered: Dec-04
are they DVC 6 ohms???, cause you could just use an amp that is stable down to 1 ohm, then estimate what its power would be from 2ohms to 1 ohm.....but for the enclsoure, what do you mean the max size is this, is that what the subs say, or thats what is limnited to your trunk???

New member
Username: Limppimpin

Post Number: 2
Registered: May-05
they are dvc 6ohms. and for the enclosure if its sealed the book says a max of .65cuft
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us