Dumb question?

 

Silver Member
Username: Rhassler

Gilford, NH

Post Number: 129
Registered: Dec-04
i was just wondering...

say if someone has 2 jl audio w7's, and they hook them up parallel to the amp, that equals a 1.5 ohm load. Can any amp thats 1 ohm stable produce that load and you just have to figure out how many watts that amp would put out at 1.5 ohms?
 

Bronze Member
Username: Jlprix91

West, Michigan Usa

Post Number: 67
Registered: Oct-04
If an amp is rated at 1 Ohm it can handle anything above, including a 1.5 ohm load
 

Silver Member
Username: 54danny54

Post Number: 213
Registered: Nov-04
then how would u get a .7 load like the MT
 

Silver Member
Username: Rob_brown

Post Number: 228
Registered: Jul-04
are w7's 3 ohms. cause if they are i think it woudl be a .75 ohm load because you take the 3 and divide it by 2 for the first sub, then by 2 again for the second sub. because they're in parallel. right?
 

Gold Member
Username: Hdubb

Farmington, Nm Usa

Post Number: 1282
Registered: Nov-04
then how would u get a .7 load like the MT


im confused. well the MT has many different coil configs, but there are amps that are .5 ohm stable.
 

Silver Member
Username: Alpineuser

Post Number: 211
Registered: Mar-05
can u get taste lose from a fooseball table?
 

Gold Member
Username: Hdubb

Farmington, Nm Usa

Post Number: 1288
Registered: Nov-04
does a bear shiznit in the woods?
can you get mole.sted by a fooseball table?
yes and yes
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us