(Code Alarm) Arm & Disarm Parking Light Confirmation Flash does not work


New member
Username: Sommerall

Houston, Texas Usa

Post Number: 1
Registered: Dec-04
The alarm does "arm" and "disarm" with audible confirmation (chirp chirp), however, the parking lights don't flash at all. Once in a while, they will suddenly work for a few days, then stop working.

Am I at the mercy of a system with a mind of its own, or could I be inadvertently activating it without knowing it and this is a feature that can be turned on & off and if so, how do I keep it on?


Bronze Member
Username: Ps1k0

Post Number: 91
Registered: Aug-04
could be a bad connection, could be a faulty module.
check the parking light connection.

Unregistered guest
my Code alarm system is totally OOS. I can't even manually lock my doors? any help would be great! checked known fuses all good? thanks in advance Sam

The parking lights flaSh but no chirp chirp - how do i turn the sound on?

do the opposite of what ever it is you did to make it stop. that should fix it :-)

Unregistered guest
I changed batteries in my car and didn't have the remote so I used the valet button to crank and drive the car. The battery was my friends so I had mine charged and gave him his back. Now even with the remote and a good battery I can't get the car started. Is there some type of sequence I must use to disable the kill start mode or so I can crank the car?
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us