Alpine Type R's


type r
Unregistered guest
I have 2 10" Type R's in a sealed box .90 cu.ft. per sub crossed over @ 80hz off a Kicker KX550.3
and it seems that I am getting too much of the low notes and not enough punch. Any suggestions? Oh ya the subs are 2ohm+2ohm, so I am running a 2ohm Load. Thanks

Silver Member
Username: Hiphopanonymous

Post Number: 169
Registered: Dec-03
I was there too. I have type r 12's. i built a new larger ported box for them and now they pound. I tried a larger sealed box too and they were deep and loud.

Bronze Member
Username: Wojopro

Post Number: 30
Registered: Nov-04
Way too little of air space.

Unregistered guest
Actually....the box is too big...
try .6-.7cf per sub.
you can just add chunks of wood until it
sounds the way you want...then glue em down

Bronze Member
Username: Wojopro

Post Number: 38
Registered: Nov-04
Oh, 10 inch. Sorry bout that. Its recommended to be between 5.5 to .8cf. Sorry about the confusion. Looked up the wrong stats on it! =)
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us