Mitsubishi ws 55807


New member
Username: Billigoat

Post Number: 1
Registered: Sep-10
was givin tv they said convegence was out. got it home pugged in stated checkin out found red will not move was going thru menus and tv shut off by it self tryed turning back on and got green blinkin light pulled codes got a 22. have downloaded manuel help pls

Platinum Member
Username: Plymouth


Post Number: 15088
Registered: Jan-08

Usualy you change the convergence Eprom then it work!

I also found those link about your problem:

New member
Username: Jaredtromp

Post Number: 1
Registered: Oct-10
Before I start checkig all the posts here, I want to ask if anyone who has an old rear projection mitsu, 55809 or some sort of that , The picture is now "bending" or perhaps what someone on this site refers to as a "bowtie" affect... Is this common and is it a do it yourself fix>??? the tv has been moved alot and with a slight tap on the top of it,, it then goes away...???? any one else having this or had it ????

Bronze Member
Username: Zobeii77


Post Number: 21
Registered: May-11
I got this from a source, saying:
You have a convergence problem, if it happened after you moved it around then its either broken solder joints around the convergence modules(stk392-110) or it is a physical problem.
You could take the front screen off and see if the mirror inside has shifted.Also take the front and rear covers and look inside for anything that might have moved or cracks near components mounted on heathsinks. hope this will help. Good luck
« Previous Thread Next Thread »

Add Your Message Here

Bold text Italics Create a hyperlink Insert a clipart image Add a YouTube Video
Need to Register?
Forgot Password?
Enable HTML code in message

Main Forums

Today's Posts

Forum Help

Follow Us