Nfusion prgramming Help Please

 

Bronze Member
Username: Tasmanian_satellite

Post Number: 95
Registered: Jun-07
i need someone to guide me through nfusion menu to program 110,119 and whatever else i need to do to the receiver so i can receive dn. thanks
 

Platinum Member
Username: Nydas

Post Number: 19207
Registered: Jun-06
Tasmanian:
You could look at http://www.nfusionforum.com or
http://www.dummychat.com or
wait for Plymouth to answer you.
 

Platinum Member
Username: Plymouth

Canada

Post Number: 14329
Registered: Jan-08
tasmanian satellite

Are you pointed on Bev?

If yes! Use this utility to reaimed your dish: http://www.dishpointer.com/

I menu>installation>antenna setting: choose 110 then put those settings:

110W
LNB Type: standard
Lo Freq: 11250
22 hz: off
DiseqC 1.0: Port 2
DiseqC 1.1: disable
Multi-Dish Switch: Disable
Lock Tp: 12355 H 20000
Motor settings: Off
LNB Power: On

119W
LNB Type: standard
Lo Freq: 11250
22 hz: off
DiseqC 1.0: Port 1
DiseqC 1.1: disable
Multi-Dish Switch: Disable
Lock Tp: 12457 H 20000
Motor settings: Off
LNB Power: On

Those setting are for a Diseq switch then you must have 2 Lnb's to get both satellites!

The files is available at nfusionforum.com or dummychat like Nydas listed above!
 

Bronze Member
Username: Tasmanian_satellite

Post Number: 97
Registered: Jun-07
thank you's very much for the help and knowledge..i will try that today and hope all goes well...tahnks again
 

Platinum Member
Username: Plymouth

Canada

Post Number: 14338
Registered: Jan-08
tasmanian satellite

Note that nfusionforum is down today but dummychat still up!
 

Bronze Member
Username: Tasmanian_satellite

Post Number: 98
Registered: Jun-07
do i get file numbers from dummychat also
 

Platinum Member
Username: Plymouth

Canada

Post Number: 14340
Registered: Jan-08
Yes! But you must be registred!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us