Can't lock 61.5

sam bhat New member Username: Sambhat Usa Post Number: 2 Registered: Feb-08	Posted on Sunday, August 09, 2009 - 15:27 GMT hi guys I am not able to lock 61.5 satellite on nfusion phoenix. I have changed nothing with respect to the dish set up. lnb type: standard lo freq: 11250 22 khz: off DiSEQC1.0: Port 2 DiSEQC1.1: Disable Muti Dish switch: Disable Lock Tp: [2/32]12239 H 21500 Motor Settings: Off LNB Power: On I am able to lock 110, 119 but not 61.5 Please help
Chumley Silver Member Username: Chumley Post Number: 515 Registered: Dec-08	Posted on Sunday, August 09, 2009 - 15:37 GMT Lock Tp: [2/32]12239 H 21500 the symbol rate of 21500 indicates HD ( can't get HD signal with nfusion phoenix)... use a TP that has symbol rate of 20000
sam bhat New member Username: Sambhat Usa Post Number: 3 Registered: Feb-08	Posted on Sunday, August 09, 2009 - 15:55 GMT just edited the 12239 to to 20000 symbol rate and rescanned. Still no luck. After rescan it did not pick up any additional channels. I am looking for channels 611 and 614. Let me know what else can I do. Thanks for your help
Chumley Silver Member Username: Chumley Post Number: 516 Registered: Dec-08	Posted on Sunday, August 09, 2009 - 16:11 GMT You didn't need to edit that TP ,I was just letting you know that TP's with a symbol rate of 21500 will not have signal with the phoenix. Try scanning TP 12414 and 12472 for channels 611 , 614..
Plymouth Platinum Member Username: Plymouth Canada Post Number: 10513 Registered: Jan-08	Posted on Sunday, August 09, 2009 - 16:31 GMT Sam I use 12326 H 20000, try this one.
sam bhat New member Username: Sambhat Usa Post Number: 4 Registered: Feb-08	Posted on Sunday, August 09, 2009 - 16:32 GMT thanks but no luck on those two tps either. S and Q never turns green
Plymouth Platinum Member Username: Plymouth Canada Post Number: 10514 Registered: Jan-08	Posted on Sunday, August 09, 2009 - 16:43 GMT Sam Where are you located?(state)
sam bhat New member Username: Sambhat Usa Post Number: 5 Registered: Feb-08	Posted on Sunday, August 09, 2009 - 16:54 GMT Plymouth, Thanks for your reply. I am in NJ. I tried 12326 H 20000 but no luck I hardly get any channels from 61.5 except for a few on 12632 for which the S and Q turn green.
sam bhat New member Username: Sambhat Usa Post Number: 6 Registered: Feb-08	Posted on Sunday, August 09, 2009 - 16:57 GMT Plymouth, Thanks for your reply. I am in NJ. I tried 12326 H 20000 but no luck I hardly get any channels from 61.5 except for a few on 12632 for which the S and Q turn green. When I look up lyngsat, I should be getting a few channels 12472 which includes channel 614 but I can't get signal on this tp.
Plymouth Platinum Member Username: Plymouth Canada Post Number: 10517 Registered: Jan-08	Posted on Sunday, August 09, 2009 - 17:05 GMT Sam Realign your dish.
sam bhat New member Username: Sambhat Usa Post Number: 7 Registered: Feb-08	Posted on Sunday, August 09, 2009 - 17:15 GMT Thanks but that would not be easy is it? This is a fixed dish. Any suggestions on easiest way of doing this by myself?
Plymouth Platinum Member Username: Plymouth Canada Post Number: 10518 Registered: Jan-08	Posted on Sunday, August 09, 2009 - 18:46 GMT Sam The best way is buy a cheap satellite tracker that you hook between the lnb and receiver and try to get best signal. You can also check only your connexions unhook and rehook all cable between this lnb and your receiver.
sam bhat New member Username: Sambhat Usa Post Number: 8 Registered: Feb-08	Posted on Sunday, August 09, 2009 - 19:06 GMT Thanks Plymouth. Any suggestions?

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us