VS MAXHD Stuck on Boot.

 

Silver Member
Username: Zagros

Post Number: 219
Registered: Apr-06
It froze. I restarted it from the back. Since than it is just rebooting.
I followed the instruction in the link below but it didn't work.
http://www*hashhu*com/forums/showthread.php?t=199853
Can anyone help please?
Edit/Delete Message
 

Gold Member
Username: Gregraf

Post Number: 2404
Registered: Dec-07
Unhook Satellite wire and see if it will stay on. Maybe you have a short in coax wire.
 

Silver Member
Username: Zagros

Post Number: 220
Registered: Apr-06
I did so. No it dosen't have anything to do with the cables.
PS. Thanks for your replay.
 

Gold Member
Username: Gregraf

Post Number: 2405
Registered: Dec-07
Id try to get the file from somewhere else and then try that procedure again.
 

Silver Member
Username: Zagros

Post Number: 221
Registered: Apr-06
I downloaded it from Viesat USA also, the official VS Site.
 

Gold Member
Username: Gregraf

Post Number: 2406
Registered: Dec-07
Found this on google maybe it will help


http://www.ftabins.net/showthread.php?t=77632
 

Silver Member
Username: Zagros

Post Number: 222
Registered: Apr-06
I have already tried that as well.
 

Gold Member
Username: Plymouth

Canada

Post Number: 8112
Registered: Jan-08
You must download factory bin with the Null cable from your computer .
Go to: [link removed]
download this 2 files:
VSHD Loader - Firmware Updater v1.1( Serial)
[link removed]
And the factory bin:
[link removed]
for download with the loader in your receiver

Power off switch on receiver back panel
open program take file v0107
clic D to download in receiver and a second after
switch on
the transfert take 5-15 mins
you must see 0000
download the latest bin with USB

It can take many times with different delay.
Good luck
 

Silver Member
Username: Zagros

Post Number: 223
Registered: Apr-06
I tried that also yesterday. Plus I used the Cleaner File ofter the factory bin. Didn't work either.
 

Gold Member
Username: Plymouth

Canada

Post Number: 8117
Registered: Jan-08
Zagros

What tou see on display?
Do you have a error message?
 

Silver Member
Username: Zagros

Post Number: 224
Registered: Apr-06
It says "Boot and than Check H/W and after that On". From there it goes back to boot again and the whole thing repeats.
 

Silver Member
Username: Juancho

CANADA Xx

Post Number: 542
Registered: Jun-08
Zagros,
here .The Problem....
VIewsat MaxHD Boot Init Check H/w

I read some Forums and I tried whatever it asked but I still can't get out of Boot Loop for Max HD.

Here is what I did so far:
1) Turn off everything including AC cable out of wall
2) Used VSHD Loader1.1 to upload v107.peg file
3) It completed 100% then Erase and Program
4) After that its back to Boot Init Check H/w

Please help.
THE SOLUTION
ok for the benefit of everyone here is the scoop:
Use VSHD edit and open a blank .cha file. Save it for MAXHD load it with loader/serial port and it should download - erase - program and Bingo. NO more boot loop!

VSDH edit can be downloaded from viewsat usa in the support/download section ="
 

Silver Member
Username: Juancho

CANADA Xx

Post Number: 543
Registered: Jun-08
here is the link
[link removed]
 

Silver Member
Username: Zagros

Post Number: 225
Registered: Apr-06
Can you please be more specific? I can't find VSHD edit. I do see VSHD Channel Edit. It that the one?
 

Silver Member
Username: Zagros

Post Number: 226
Registered: Apr-06
Bingo. That one worked. Thanks Juan. That was a great help.
Thanks Plymouth and gregraf. I appreciate your help also.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us