Breaking News by "King T.M."

 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3221
Registered: Oct-06
Please read carefuly before yo jump to wrong conclusion

I haven't done any major tests since September/October of 2007
I have been sensing something unusual past 2 weeks
This evening I came across something interesting
It appears to me DN is upchanging some hardware compatibility similar to what happened last November 2007

There are good news and some band news
First the bad news
The hardware upchange will most likely affect PID frequency

Look for signs
- Yo'll see some channels drop out day by day not all at once
- They will be out on certain models not all of FTA models
- Specifically VS, SV, Pansat, HD
- This may not affect Kool-sat, Visionsat and CW and perhaps few other models

PID affects the tuner itself and how it's programmed
The bin storage is not in the same memory zone
Therefore it requires a tuner reconfiguration
Entirely different programming skills
So coders won't be able to update their bins as easily

The good news
Coders left variable PID field this time
So yo can manually go in and configure yor tuner and then rescan
Each field is 4 Decimal Digits

So get yorself ready for some bumpy ride

About when this will take effect?
I already see some dropped out channels


Don't worry
Don't panic
This was done once before
But for sure will give friendly PTA users hard time

So that yo know I'm a real tester
My stuff is timed and dated
White Hawk has been my best record keeper
Keep the good work Hawk
I started to like yo
Sometimes yo are helpful

King T.M.
 

Gold Member
Username: Gregraf

Post Number: 1053
Registered: Dec-07
Now i know your full of sh!t White Hawk can't tell time.
 

Silver Member
Username: Tigger_woods

CURRENTLY RUNNING NAGRA 3VIP DIAMOND ...

Post Number: 676
Registered: Jun-07
What about the card swap? Supposedly all most complete? Why would they be working so hard at this time?
 

Gold Member
Username: Saqeeb9000

Post Number: 3656
Registered: Oct-07
thanks for info king...
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3285
Registered: Jan-08
King
Dn do this since 10 months not new, thats why i recommend to deleted Provider in Keys Menu
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3286
Registered: Jan-08
king
Many Tp change we need to do a blind scan and you dont recommand it, from which planet you are?
All receiver track PID by itself, but if Tp is no there, autoscan cant get any channels.

Sorry not this time
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3223
Registered: Oct-06
"What about the card swap? Supposedly all most complete"?
I think that's B#V
I'm not in Canada and I don't have B#V I really don't know when exactly B#V fully rolls to N-3

D#N suspended the card swap at least for present time
No signs of doing so
They do many things that absolutely make no sense to me
One of them is why on earth are they still keeping Sat 121W if 118 is fully in place?

Modifying PID frequency tuner for second time in less than one year is what seems like what they are up to

Plymouth
Yo gonna have to trust me this time
Deleting provider is not going to alter the tuner presets
They did that along with morphing
Maybe the morhing can be stopped by deleting provider
They are gonna change the tuner parameters
Which is what makes the receiver recognize the signal itself

There are two major sections in flashing of ROM
One is the Utility of the tuner
Other is the conditional access

New bins that's all Conditional Access
But Freq PID are supposed to be permanent freq coordinates not meant to be variable
If yo do, yo must be a heck of a programmer that understands hardware well. Frq tuners and basically make them work from Assy Language
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3289
Registered: Jan-08
King
Receiver with scan, search for PID by itself, thats why many time video and sound PID, can be much more diffent and receiver fount it.

In clear PID not be permanant at all.

You based it on some problem you heard on forum.

This problem is only on Dn and many rehandling on channels and Tp cause it.

Factory default seems to be the better solution for now and blind scan for created new Tp who dont be erase, when new Tp is in receiver it stay in, until you put factory bin.

It is normal to reset the receiver sometime with all change in the run program.
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3225
Registered: Oct-06
Yo'll get a better idea when it happens
Right now we are talking apples and oranges

We can discuss what channels yo don't have
Do yo get all Encore Channels?
 

Gold Member
Username: Cartier1

Post Number: 1957
Registered: Feb-07
KING . my scan disk cruzer has lot of valuable information and pictures . is not reconizble but any computer. no light nothing. i guess i pull it without the safety steps . any way to get back my data???/
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3293
Registered: Jan-08
On 110.0W
341 Encore West 12428 20000 V 5/6 V4130 A4131 P4130
342 Encore West.east 12428 20000 V 5/6 V5922 A5923 P5922
343 Encore Action East 12486 20000 V 5/6 V6690 A6691 P6690
344 Encore Mystery East 12224 20000 V 5/6 V4642 A4643 P4642
345 Encore Drama East 12486 20000 V 5/6 V4642 A4643 P4642
346 Encore Love East 12486 20000 V 5/6 V6946 A6947 P6946
347 Encore Wam east 12516 20000 V 5/6 V4130 A4131 P4130

All work fine
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3294
Registered: Jan-08
Note if you check on Lyngsat PID are different and never i put PID in, manualy

read this thread:

https://www.ecoustics.com/electronics/forum/home-video/508136.html
 

Bronze Member
Username: Liger

Post Number: 22
Registered: May-08
People don't worry, this is just another bullshit by FAKEMAN.
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3229
Registered: Oct-06
Plymouth
Which receiver yo got?
Ar yo missing any channels?

I'm not worried about missing channels
I basically look at activities and try make sense out of it
Solving channels by rescaning and deleting is not what I'm searching for

There are 2 streams which yo don't see
There are N-2 and N-3
On a top of that 2 sets of PIDs
DN playing with PIDs

I understand yo got a motor
So slight shift in the dish make a world difference as it pitches the frequency (varies frequency)
Yo think cuz dish is not pointed correctly so yo offset it by moving it

Yo'll fully understand when DN drops out one of the streams or change it

I look and compare both transitions of the 2 streams
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3295
Registered: Jan-08
"Plymouth
Which receiver yo got?
Ar yo missing any channels?"

All my test performed on Vs Ultra
Yes i missing channels, but i recover it with blind scan and delete provider in keys menu


"There are 2 streams which yo don't see
There are N-2 and N-3
On a top of that 2 sets of PIDs
DN playing with PIDs"

Yes you are right on it


"I understand yo got a motor
So slight shift in the dish make a world difference as it pitches the frequency (varies frequency)
Yo think cuz dish is not pointed correctly so yo offset it by moving it"

As i can see you understand nothing on motor operation.
On mode "Usals" Receiver align by itself the motor on each channels by left right scan and get best position.
So I never comment on it


"Yo'll fully understand when DN drops out one of the streams or change it"

Dn, Bev, Gc, service channels on many satellites do same thing, we need to blind scan for track new Tp and channels. "No signal" can be see as encrypted channel.

I have a Vs Ultra and a CW600s Premium
and i need to rescan CW600S Premium many time on new bin.

you talk with nonsense on many post

When i ask to you for explained how you perform your test, you never answer

When you say, i learn to you how... never you give clear answer.


Now explain me, how you proceed for your test and which equipments you use?

Thanks
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3230
Registered: Oct-06
Again
Yor solving missing channels by re-scaning and deleting
And that's completely different from what I'm after

I don't have any different equipement from a basic tuner, dish and LNB
But I do pay attention to data
Ask Jimmy

Look
Believe it or not
DN is upchanging frequency PIDs on the second stream
I gave everyone heads up
Yo can belive it now or wait to this Fall when it fully rolls over

It's not end of PTA
I do give a lot of credits to coders
BUT THERE WILL BE DOWN TIME DUE TO HARDWARE CHANGE IN FREQ

As far as I don't understand 8-bit dish dirver protocol commands, I won't comment on it I let yor imagination to decide

We are talking Apples and Oranges
So yo find out what I meant this Fall
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3296
Registered: Jan-08
Note i explain it for all users newbie and older without enter in technic term.

I,m a thechnician service man, my custumers dont understand technic term, i need to explain in easy term for everybody.
Try to do like me.

Thanks
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3297
Registered: Jan-08
"Now explain me, how you proceed for your test and which equipments you use?"

If you go in my profile you can see my equipment

You dont give again acceptable answer.
Which receiver you use?
Which dish and LNB you use?
How you can see data?

Give me clear answer on each question.
 

Silver Member
Username: Mucho

Post Number: 516
Registered: Dec-07
Plymouth
Our friend is hiding from you
You have put some tough questions to him.
 

Bronze Member
Username: Valinex

Post Number: 31
Registered: Mar-06
Plymouth, how do you delete provider in keys ? On a VS ultra
 

Bronze Member
Username: Bouttep

Post Number: 61
Registered: Apr-06
plymouth how do i recover channels with sv4000 , i have a bunch of them missing
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3298
Registered: Jan-08
Valinex and Joe

Try a blind scan first if no work


Go in Code Menu, delete these 3 dish provider 00 01 00, 01 01 00 and 01 06 00 on Nagra with F3 button (viewsat)on remote(dont delete keys) and save it and reload last bin.
Autoroll can take 10 minutes to regenerated keys and all channels would work

If it not work, do a factory default or reset, reload last bin and autoscan all sats.
Dont load factory bin, because it delete save Tp in receiver memory, use it only on dead receiver.

Good luck
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3231
Registered: Oct-06
Plymouth
There is nothing I can explain better than 2 streams coming from 2 satellites

Yo don't understand that
Yo haven't been here long enough
Yo joined satellites Jan 2008
So yo missed a lot

2 satelittes, 2 streams
61.5 Ech-St-1, Rainbow-1
110, Ech-st-8, Echo-St-10 (50/50)
119, Anik-3, Ech-st 7 (50/50)
148 Ech-st, 1, Ech-st 2 (ES-2 is no longer)

I picked both streams before they become public record
There were 4 or 5 guys who can possibly know what 2 streams on this Forum
- LK (no longer a member)
- Kavin Reno (no longer a member)
- Satscanner (no longer a member)
- Nalin Nyda

So ask Nalyn if there is One stream or Two
The 2 streams were placed to supply N-2 and N-3
Phasing out N-2 leaving N-3 with new swap card
Some how D#N suspended the card swap at least for present time
Only B#V doing the card swap
I don't know why, but that's what I can see

So they are taking 2 different pathes for whatever reason

Now that D#n has an extra stream
They are upchanging freq PID channel by channel on the secondery stream
Until fully complete then they drop out

So the focus of the main issue here
Is 2 streams
So if yo tell me that's cuz I'm scaning wrong
Then yo don't have a clue what second stream realy is
No second stream then I have nothing to discuss

If yo recognize the 2 streams
Then we can go forward and talk about testing
No 2 streams, yo got nothing to test

I hope I made my point clearer this time
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3300
Registered: Jan-08
"Now explain me, how you proceed for your test and which equipments you use?"

If you go in my profile you can see my equipment

You dont give again acceptable answer.
Which receiver you use?
Which dish and LNB you use?
How you can see data?

Give me clear answer on each question.
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3301
Registered: Jan-08
"Yo don't understand that
Yo haven't been here long enough
Yo joined satellites Jan 2008
So yo missed a lot"

King stop it before everybody laugh.

"Now explain me, how you proceed for your test and which equipments you use?"

If you go in my profile you can see my equipment

You dont give again acceptable answer.
Which receiver you use?
Which dish and LNB you use?
How you can see data?

Give me clear answer on each question.
 

Bronze Member
Username: Kj101

Post Number: 80
Registered: Jun-06
You don't have a clue stop the bs.
 

Bronze Member
Username: Kj101

Post Number: 81
Registered: Jun-06
Sorry Should have have been a little more specific. King Tapeman you don't have a clue. Stop your bs.
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3302
Registered: Jan-08
In the fact King have a Viewsat Xtreme and mention it on a post i forget, nobody know exactly which dish size, for sure dont have motor and Doreen is right, he is a great dreamer.

I know electronic and since i have 8 years, you try to impress newbies with your salad of great term useless for any technician.

Why you dont answer to my question instead of try to discredited me.

The world of King is: King, him and himself.

I would not be impolite, but you went down in my regard.

Thank
 

Bronze Member
Username: Liger

Post Number: 23
Registered: May-08
WHAT DID I TELL YOU GUYS? HE'S A "FAKEMAN" HE'S FAKING EVERYTHING.
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3234
Registered: Oct-06
Hey Plymouth
I was tight up with family business

I only got few minutes
Man I do simple basic tests
Nothing out of this world
I scan all satellites in my back yard
One by one hundreds of times
I look for anything
I look for clues

Many TPs don't come on as easily
So I dial tune them manually
- Basic Dish
- Basic LNB
- Basic FTA reciver (VS-Xtreme)

I did answer that above
The data I gather is nothing but freq info, polarity, FEC, S/R, PIDs, etc.

But I do pay a lot of attention to scanned channels

Everything is basic
I don't look for just turning my TV on and that's it


Now if yo were expecting something a lot deeper I'm sorry to disappoint yo
They crack down on sites and members that are involved in programming
I've had a close call in the past when I was single
And I will not risk my family in getting involved with security abreach
What I do is within my civil liberty
YO MUST USE CAUTION

This is a good article
I didn't write it
But it contains some juicy programming
http://id-discussions.com/forum/forumdisplay.php?f=136

I still think we are talking apples and oranges
I'm not sure what exactly yo are expecting and what's considered acceptable

My objective was simple and straight to the point
And I had only repeated it at least 6 times
There is an upchange to freq PIDs by D#N
All in the second stream
Can be easily detected by simple scanning
Similar to what we had last November
I'm not sure what yor confused about that
Yo are scanning the channels and delete what's got no video
And missing all the clues
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3235
Registered: Oct-06
This is one of the sites yo can get what yo want
Canada
http://www.dssgear.ca/
At yor risk
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3306
Registered: Jan-08
Finally King i have acceptable answers, that close My 3 post on it.
Thanks King

Concern PID i already answer to you on my post 3295:

"There are 2 streams which yo don't see
There are N-2 and N-3
On a top of that 2 sets of PIDs
DN playing with PIDs"

Yes you are right on it

"Yo are scanning the channels and delete what's got no video"

PID: Package Identifier, all digital data sent by satellite are sent as data packets.

It's usual to delete channels got no video.

I give you a example on Bev, if i do autoscan during Nascar sprint cup race, only new PID is add(5 channels)i got 5 new channels, after the race if i select this channels they autoroll with no picture and sound, now, if i rescan, these channels dont disappear.

Now if these channels (hypothetical but real on Dn)are assigned on new PID, you have interference between old and new channel who have identical info data package(channels number, name identifier channel etc.).
in a program, processor scan first line to last line and the new identical program is reject, thats why you cant see channel with new PID and need to delete it.

I hope now you understand, need to delete empty channel

Thanks
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3236
Registered: Oct-06
The other thing yo need to know
The streams come from 2 different TPs
They are not on the same transponder not same satellite
But they placed next to each other within 0.2 degrees or about 20 Miles in space
(This is my approximation, I don't know how far apart)
They interlace together as one satellite

So when yo blind scan yo'll think one good channel other is bad
Well sometimes they are both good
That all depends on the encryption

Now if I get down to business
I'm guessing that both streams at present time are Nag#ra-2
few selections of those transponders are slowly one by one changing to a different value PID

Yo'll say what's the big deal about that?
Many TPs should have set frequencies as yo do normal scan or yo must do blind scan
Part of yor tuner presets

Now my theory is
They have some fake TPs
As yo do blind scan it will disable something disallowing to tune the signal

This is what I was after last year
They executed that in November
I wasn't around at that time
Also gave offal hard time to coders
Many people thought coders had personal issues but I saw was something in the hardware compatibility

My guesses were they either play with polarity or other analog interference frequency that can disable the tuner span like that


Now that I see this activity going on once again
I'm saying they are upchanging PID freq once again
And it will give hard time getting the correct signal


According to my observation
They will apply new provider control that somehow also alter signal level
And the frequent time call

Over all this can make PTA very difficult to breach
This time they are throwing many shells

The Million Dollar question is:
How good the coders and how fast they will adjust

This is what I'm here to watch
And it starts with simple basic Sky Scanning


After all end of PTA can be real close
Yo never know
 

Silver Member
Username: Dimwitt

Post Number: 840
Registered: Aug-06
WTF ,this is OFFAL !!!
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3309
Registered: Jan-08
King you dont read my post 3306

Blind scan dont give 2 channels if you delete sat and then blind scan

That close one way discussion
 

Bronze Member
Username: Picanha

East LA

Post Number: 37
Registered: Jun-08
This is a stupid thread!!...just a simple case of people trying to one up on each other.........the psychomonster thread have some meaning to them today. Go there to learn.
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3238
Registered: Oct-06
My bad
That's the British way of saying rubbish
Yo can say awful hard time instead
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3239
Registered: Oct-06
Hey Kid
Yo don't like the thread get off it before yo get hurt


"Blind scan don't give 2 channels if you delete sat and then blind scan "
Blind scan don't give channels
It's the tuner

Yo still not visualizing 2 streams

Blind scan doesn't care what satellite yor on
It tunes the frequency by it's internal clock frequency later it sums up the two and come back with final sum
Already down converted by LNB
What yor pointing to make a slight difference

It's a sweep by a set freq increment
That's what I like about VS
Yo can easily adjust tuner parameters

So if yo tell me
When yo do blind scan and only get one set of channels then yor setup is not correct or some how over-ridden by something else


I base my scans on 3 dishes, 3 receivers
All pointing to same thing
1-DTV phase-3
1-DTV phase-2
1-Dish 500 with twin LNB
2-VSX, 1-Vision sat rcvr
All come consistent with same results
No way I got that wrong


There are 2 streams
And I posted that about one and a half year ago
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3311
Registered: Jan-08
"So if yo tell me
When yo do blind scan and only get one set of channels then yor setup is not correct or some how over-ridden by something else"

My setup better then yours, thats why i dont have problem.
I remember to you then receiver and motor track best azimut of satellite and with big dish and and good LNB focus, i can performed 0.2 degree azimut,which not get 2 satellites and give scan without parasite from other satellite.

Do you blind scan more then 1 sat?

King i think you need to learn again

You dont want to understand with all reply from me.

Why not listen and learn?

Buy a good equipment and do good setup whit it.
Your system and mine is like apples and and oranges

Thanks
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3242
Registered: Oct-06
I never said I had a problem scaning
I'm a master of scaning
What yor saying is there is only one stream
Therefore one of us will learn how to scan soon

I'm done with yor discussion
There are 2 streams out there regardless how big is yor dish
Yo wanna believe it that's fine
Yo don't yor about to learn soon

Why don't yo go ask Nalin if it's 1 or 2
Before yo teach me how to scan
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3312
Registered: Jan-08
KING
"There are 2 streams which yo don't see
There are N-2 and N-3
On a top of that 2 sets of PIDs
DN playing with PIDs"

PLYMOUTH
Yes you are right on it

I never contested it

Check on my post 3295 and 3306.
You dont read my post!

Bin recognize N3 PID channels now , it's a old problem, but you need to rescan it.

Why dont understand it?
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3243
Registered: Oct-06
Here is one little detail for yo to show yo know nothing about scaning:

- Lyngsat has N2, N3 security encryption
Explain to me in Layman's terms how would that possibly be if there is only one stream?

- Yo wanna know how long ago I detected this
Then read this thread (timed and dated)
Posted on Friday, March 30, 2007 - 04:34 am:
https://www.ecoustics.com/electronics/forum/home-video/341734.html
And don't forget
I posted that before it comes out as public record

All yo had in few week experience is one 30" dish and invacom LNB
And yo coming to teach me how to scan
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3244
Registered: Oct-06
2 streams my friend means 2 identical programs on 2 different TPs on 2 different frequencies right next to each other

When yo say bin recognize N3
It means yo got no idea about what 2 streams mean
If it's on a frequency span
Yo should be able to scan it
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3313
Registered: Jan-08
King teach how you get second stream and give me complete Tp with PID.

I dont have problem and i try to understand why you have problem where i dont have.

I'm equiped for scan more sat then you, but you bring problems not see by me.

My system work very well since i post my first post on this forum and found many tricks for keep it fonctional.

I,m the only one with enough patience for discuting with you on this.

Conclusion give me complete info Tp and PID which i can doing a test and confirm your observation.
 

Gold Member
Username: Cartier1

Post Number: 1958
Registered: Feb-07
PLYUMOUTH IM TIRED OF HAVING MY EMAIL BOX FULL OF THIS THREAD. WHY DONT YOU ASK KING TO GIVE YOU HIS PHONE NUMBER AND STRIGHT THINGS TOGETHER .
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3314
Registered: Jan-08
Cartier
Explained me why you have E-Mail on it.

Are you Admin?

With all my respect, this is a satellite discussion and each members have choice not read it.

I just try to understand King observation.
 

Gold Member
Username: Cartier1

Post Number: 1959
Registered: Feb-07
PLAYMOUTH you have right to do anything you want . i know king long time . trying to understand is one thing and trying to challenge is an otherthing . if we wanna try to understand then we just listen aand ask a few questions .
the guy his hubby is testing nothing wrong with that . i learn you learn and all of us learn this way . you know satelitte world is like chassing the ghost.
 

Silver Member
Username: Dimwitt

Post Number: 842
Registered: Aug-06
King Tapeman
Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 2032
Registered: Oct-06

Posted on Saturday, January 05, 2008 - 11:18 am: *************************************************

VS receivers and coders are hit
I stick my reputition once again
So far I've been always right
I assure yo I don't work for Charlie
He can't afford me

All VS products and bins under the control of somebody else not the old coders
I have no idea who is controling the show now
But this is what I think happened:
Arrests were made in December
And now they are after other VS targets

I found a spyware on a brand new computer I ony used 4 times

If yo believed in my crap in the past cuz yo R smart if yo don't yo are about to get dicked
VS products are history I hope yo didn't spend much money I only paid $180 I think I got my money worth it. DID YO?
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3315
Registered: Jan-08
Cartier1
Stay out of this thread until you spell my name correctly

Give me your E-Mail

I learn to you how spell Plymouth
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 3245
Registered: Oct-06
Hey Cartier Buddy, Howar yo?
I know yo like memories
I have a life time gift souvenir for yo
Wait for next post
 

Gold Member
Username: Donnie1973

Post Number: 3053
Registered: May-06
King Tapeman
Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 2032
Registered: Oct-06

Posted on Saturday, January 05, 2008 - 11:18 am: *************************************************

VS receivers and coders are hit
I stick my reputition once again
So far I've been always right
I assure yo I don't work for Charlie
He can't afford me

All VS products and bins under the control of somebody else not the old coders
I have no idea who is controling the show now
But this is what I think happened:
Arrests were made in December
And now they are after other VS targets

I found a spyware on a brand new computer I ony used 4 times

If yo believed in my crap in the past cuz yo R smart if yo don't yo are about to get dicked
VS products are history I hope yo didn't spend much money I only paid $180 I think I got my money worth it. DID YO?


Is this a real king post??? if so, he is worse than I have ever thought. Cant believe i missed that one. I dont see how we dont take him for real!!! he is a seer i tell u. as well as a semi pro coach, but i guess not a good one as this time last year he was gone coaching, but he is here this year... hmmmm, oh, he is also a master engineer, also made a living knowing others next move before they make it. and we doubt him??? he has onlt called the end of pta for a year and a half people, what 4 different times, come on, he will get it right one of these days. dont give up king.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us