FTA Satellite Receivers FIXES! pansat fixes captive works satopia

 

Silver Member
Username: Themangod

Post Number: 539
Registered: Oct-06
FTA Satellite Receivers FIXES! pansat fixes captive works satopia

These websites below will be able to support Pansat Captive works Satopia sonicview and all the other good fta receivers. These are all trusted fta satellite receiver fixes forums. new fta receiver bin files setup info and more



[link removed] norw file release site



[link removed] norw file release site



http://www.dsstester .com no membership downloads








stick to the trusted forums listed above and you will be safe!



Upload
 

Platinum Member
Username: Nydas

Post Number: 11079
Registered: Jun-06
Kate's spam has started again.

[link removed] - VIEWSATS and ?Sonicview

[link removed] - C00LSATS

[link removed] - CaptiveWorks.

[link removed] - Ariza and Pansat Conversions

[link removed] - Nfusion
 

Platinum Member
Username: Nydas

Post Number: 11080
Registered: Jun-06
The following is an example of a very small part of a site
[link removed]

As you can see, it is loaded with information.

DISH FAQ AND HOWTO
118.7, Anik F3, Ecxostar 6...
118.7 Anik-F3, How do I get it?
RG6 Cable length & signal quality
Best dish for 82,91,110,119
Why is my signal bouncing around?
DP34 Switch Help
sick of all the ECM !! options available!!
DishPro and Legacy Info!
How to setup your Dish1000.2 with a FTA Receiver
How to Setup your Dish500 Dpp/Superdish Dp with a HD Receiver
Peaking your dish with a Satellite Finder(TIPS)
Laser Alignment
Laptop no com port question
How to start your motor dish setup, first things first.
How a diseqc switch works
DISHPRO 1000 ~ Official Document & Specs.
Aspen eagle
Broken arm on the dish
A discussion of signal strength and quality...
Nees Help Please!!!Super Dish
The "best" Dishpro Document

FTA Faq and How To's
How To Post Files & Photos
Handy utility for dish effeciency
How to reaim your BEV dish to get DN ( 1 2)
How To Use The Search Features

and many more FAQs.
 

New member
Username: Thermongod

Post :579

Post Number: 2
Registered: Jul-08
Nalin you are right im just a LOSER spammer.
 

Silver Member
Username: Themangod

Post Number: 549
Registered: Oct-06
be aware of other bad fta forums out there they are bad because they have been named in a law suit at one of there site staff.

for full info on the on-going law suit with totalfta ftadoc purefta and other bad fta forums read [link removed] norw file release site



http://www.dsstester .com no membership downloads
 

Platinum Member
Username: Nydas

Post Number: 11090
Registered: Jun-06
Always go to "home site of your receiver" first. The sites in BOLD offer direct downloads without registration.


[link removed] - VIEWSATS
[link removed] - C00LSATS and Nfusion

[link removed] - CaptiveWorks.

[link removed] - Ariza and Pansat Conversions

[link removed] - Nfusion

Other reliable sites:
[link removed]
 

Silver Member
Username: Themangod

Post Number: 557
Registered: Oct-06
A. Loading your bin using Null cable:

Connect serial cable (NULL) to PC>Stb
Open up Loader of choice (PVR-Loader 1.1 or Loader2)
Click on Tool>Configuration>Com port (Default is com 1)
Click on Open File
Click on PC>Stb (Notice the progression bar in loader)
Wait for Loader say Completed. Then on box lcd front panel screen say I.N.S.T>END>0000 or until clock count to 0.001
it is verry important. Do not turn the power off to soon
Turn the power off in front and then back switch
Connect all the cables to your box/TV
Turn the power ON from the front and back switch
Press Menu key
Select Installation and press OK
Select Antenna Setup and press OK
Select your Sat.
Here if you have a diseqC switch enter the port #, Motor or Legacy SW
No lnb type need to select (from new, you have only two selection Standard and Universal). Stb will select your lnb automatic
Press Exit and select Yes for saving the settings
Your back to Antenna Setup screen
Here you have Three choices:
1. Channel Scan
2. Auto Scan
3. Blind Scan
Select Auto Scan
Press OK
You are in the Auto Scan window and you see the Bird(Sat.) you selected and on the top of your screen are three options:
1. Search option
2. Network search
3. Scan Start
You don't change nothing, go down and select Scan Start and press OK
You do this for all the Birds (Sat.) you have
Wait for Autoroll and watch TV


[link removed] norw file release site



http://www.dsstester .com no membership downloads
 

Silver Member
Username: Gregraf

Post Number: 928
Registered: Dec-07
Anyone who listens to you Kate has there head up there azz.


Upload
 

Silver Member
Username: Themangod

Post Number: 563
Registered: Oct-06
hello

yea i give people the court paper and allow them to think and make up there own mind if those sites your naming are safe.



[link removed] norw file release site



http://www.dsstester .com no membership downloads
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us