Convertion 2500

 

Bronze Member
Username: Freedom_rites

Montreal, Qc Canada

Post Number: 26
Registered: Jan-08
i tried to convert my (converted reciver 2700 b-75) to puff with Ukr_PUFF1.0.1_ConvertBOX.zip . but it goes to 68% and it gives an error " write failed er1" im using the same cable i use for updating new bins. any help....?
 

Silver Member
Username: Luser

Post Number: 193
Registered: Nov-07
Convert back then forward.
 

Bronze Member
Username: Felt

Post Number: 29
Registered: Dec-07
looks as if you are using the wrong file i think that one is for the background image only
 

Platinum Member
Username: Nydas

Post Number: 9862
Registered: Jun-06
You must read instructions properly.
go to
http://public.box.net/2500_full_kit
and download from puff section - either the quick method or the full_kit method and then follow the instructions properly and fully. If in doubt, just go back to b60 Boot and start all over again.
There are no short cuts.
 

Silver Member
Username: Bill038

Post Number: 652
Registered: Sep-06
If you listen to nalin, the wicked witch of the north, she will kill your box, send you to hacked sites and turn you in to DN.

Check her post counts, that is really the number of boxes she has killed. Do you know when she is going to kill a box.......................The next time she posts and someone takes her advice.

Stay away from her advice, she is here to send you to hacked sites and kill your fta box.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us