Viewsat Ultra Issues

 

Bronze Member
Username: Cool4us

Post Number: 28
Registered: Dec-07
Hi,
I have a viewsat ultra and I am not getting any channels, Antenna setup is good, basically it has locked Echo*7, Echo*8 and 10 and Echo* 5, but not should what should be LNBType?
 

Silver Member
Username: Madflea168

Post Number: 169
Registered: Jan-08
are you new?

make sure your antenna is at the correct position. check at the dishpointer*com
110/119 should be at 11250/ocs-dp

I don't have eko 5, I think should be the same.
 

Bronze Member
Username: Sam5002

Ny, Ny Usa

Post Number: 72
Registered: Jan-06
I have a problem similar to this, no signal from 110 west. Checked all settings OK ,but still signal strength is ZERO.
 

Bronze Member
Username: Bangle

Post Number: 12
Registered: Jan-08
you might consider to upload the factory file and flash the lastest bin file for the Ultra again to see that work better. I got some problems like that before and it worked
 

Silver Member
Username: Madflea168

Post Number: 171
Registered: Jan-08
it happened sometimes, I am experiencing lost quality on some channels sometimes right now with the latest bin, but if I switch off from the back and reboot, everything is back ok. just bit lazy to reload the bins, ecm gonna hit very soon anyway, will fix that till then.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us