Why am i losing signal when switching from GC to DN?


Silver Member
Username: Machedonul

Post Number: 275
Registered: Jul-06
if i watch globecast (the little time i get to watch since it's down most of the time) and then i go to 110 or 119, i get very bad reception and then the NO SIGNAL message

once i reboot my 2500A, then i have signal on 110/119 but when initially making the change from a GC channel to a non-GC channel it says NO SIGNAL

it doesnt happen the other way around, like from 110/119 to 97.0W....only from GC to DN

what can be the reason?

Silver Member
Username: Machedonul

Post Number: 276
Registered: Jul-06
anyone? :-)

Bronze Member
Username: Tale

Post Number: 32
Registered: Sep-07
Per King T

Polarity problems
Few things yo may consider

- Turn off all LNB power in antenna setup for any unused LNB
- make sure yo got good crimps no exposed cables
- Make sure no moistures on any connectors
- Cover any unused coax output on sw or LNB
- change the order of coax outputs off LNB
- NO SW21
- May want to try to use different DISEqC switch Brand
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us