Scrambled or bad channel on 2700 a pansat

 

Bronze Member
Username: Abcdefghijklmnop

Post Number: 22
Registered: Sep-06
can someone help me with this problem i did boot b-75 upgrade on my pansat 2700A after that it worked for a couple of days and now its been three weeks and i am getting scrambled and bad channel ? anyone any help
 

Silver Member
Username: Eatfish111

Post Number: 347
Registered: Dec-06
did you also updat with the 203 bin file when you did the b-75 upgrade?

if not do it

if yes then reset factory defaults and set your sats again.
Or do a hard reboot from the back turn receiver off with the switch in the back wait 30 seconds then turn back on.
 

Silver Member
Username: Micklee11801

Post Number: 114
Registered: Feb-06
makesure autoroll is on too.
 

Silver Member
Username: Lroy

Post Number: 222
Registered: Aug-06
This can be fixed by ensuring that the box is flashed with a working bin, have all your settings correct and then, go to menu, parental control, second pin, enter code (0000), then go to set default key and press OK. After that exit and allow keys to roll (if an AR bin was used, or else enter keys manually), enjoy TV again.
 

Bronze Member
Username: Abcdefghijklmnop

Post Number: 23
Registered: Sep-06
thank you guys it worked i put the bin 203 and then turned auto roll on and wallah
thanks again for ur help
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us