Is there an autoroll for co*lsat?

 

New member
Username: Kille

Post Number: 4
Registered: Feb-05
is there a bin out there for a co*lsat5000 that has autoroll?, and if so where?
 

Gold Member
Username: Lklives

Post Number: 5037
Registered: Jan-06
Bin 135 since 10-11...at any reputable Dss site!
 

Gold Member
Username: Lklives

Post Number: 5171
Registered: Jan-06
copy/paste..works on all Coo*lsats..

If you have trouble with autoroll on Coo*lsat
NVRAM Cleaning Helps AutoRoll

I'm running a CS6k with 135 and was having trouble with the autoroll not working. I had to hard boot, i.e. turn off the CS with the switch in the back, every time the keys changed.

I cleaned out my NVRAM and that problem has gone away, now autoroll works fine.

To clean out your NVRAM, hold the power button on the STB and press the up channel button. You will get a new menu that you may not have seen before. Navigate to the NVRAM with the arrow keys on your remote and when highlighted hit select. This will clean out the NVRAM.
this is like doing a database reset so
when your done redo all your settings then autoscan you'll be good to go
i have tried this and it works
 

Gold Member
Username: Lklives

Post Number: 5190
Registered: Jan-06
bump
 

Silver Member
Username: Jrq

Post Number: 160
Registered: Jul-06
Very good piece of info this. Should take away some frustration for a lot of folks.
 

Bronze Member
Username: Fidarahman

Post Number: 78
Registered: Nov-05
This works and the keys change both for DN and B*v, but some channels on DN and all on B*v go black at times..although the keys change to the latest.Can you explain how can we overcome that please?This is regarding CS 4000pro
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us