Hey all just new to the whole FTA Stuff but have been reading and reading it just goes on and on, Good info though! Anyways my problems lies with how do you determine what software is already installed in your receiver (Pansat 2500A) if I go to my main menu and scroll down to system info it says
Not sure what that all means? The unit was required used and seems to work not bad, but as well I seem to get allot of good singles from allot of different satellites! Like for instance these are what I am getting nimiq 1/ku nimiq 2/ku Echo 3/ku " " 2/ku " " 4/ku " " 1.2/ku " " 7/ku " " 8.6/ku As of now I used to have bell expressvu and my disk is pointed at 81 with 91 percent (with the Fta) signal but clearly I just don't know witch satellite to use? Some channels work and some don't work and the menu rarely displays the info I guess clearly I don't know if I need to load a new loader as pertaining to the boot ver: It seems to have no reference to the ones that are available? Using the wrong flash would not be good. So I turn to the knowledgeable like yourselves and seek some kind of guidance I guess you could say, thanks let me know
U have the 273T bin , which is current, uploaded into receiver....the sotfware is fine..U do NOT get all those satellites!...U can ONLY get what is on the dish!..1 LNB = 1 satellite, 2 LNB = 2 satellites, 3 LNB's = 3 satellites etc..
so U need to go up on roof...check out the LNB's, aim them to the sats u want..configure your receiver settings, then do the wiring and switch , and scan those sats..110w (echo 8/6)- 119w (echo 7) from Dishnetwork (DN) are most popular....91w - nimiq 1 (bell Canadian TV) is popular with the French Canadians..
U still have MUCH reading to do..U're not even in the ball park yet!
hi i have pansat 2500A and my problem is: everytime i enter a new key for the dish network (N 0101 00: 9E 5B 7A 77 C0 FE 91 CA 4D 2A DC 33 D4 CD E3 75) and press store ....then exit....a few minuts later the picture stops and i go back on the nagravision 2 and see the old keys....its not storing right.... I checked the system information it says X-858L API: 2.72 o_EU Boot ver: 6.0 and im using 3 sat and these are the names ECHO 8.6/ku ECHO 7/ku ECHO 0.3/ku so when i enter the new key it works for few mins and it changes back to the defult key.. anyway i can stop that? or something.. someone please help......
lk, Thanks for the reply, Not much of a French Canadian myself but I have heard of them before! I have no doubt I have allot of reading to do like I said I'm fairly new at the hobby. Thanks for the reply and advice. As I stand now I have 2 lnb's hooked up, 89 witch is for regular sat and 91 witch is for hd channels witch is for my 6100 had receiver.I have 2 cable coming out of each lnb and each one going into to a switch then singly going to each receiver (FTA) and (6100) witch is not used anymore. I'm confident that they are wired correctly and pointed properly. I seem to get allot of stations but the only thing is that the menu is all screwed,and I can't seem to figure out how to make all the adult channels have a password (0000) when selecting them. before I tried to reset to factory setting it worked.
hello shaneel lalani u need to get the 273t bin mentioned earlier so that your keys dont autoroll. however, if you want to continue with the bin you are currently using change sat names as soon as you get picture,,, there is much info on the web.. best thing to do is update to 273t, which is working really good.
best thing for you bigd is to download an updated channel list (channel master). its really easy to use.. u just need to put your part into it. u will be able to lock, select favorites, etc from ur computer.. again its easy just read read and read some more.
My Pansat 2500a has 2.73t 4SecGC_RTN_TVE Boot Ver: 6.0 18 Mar.2006 chancysand I get 89% Quality in 118 and 90% signals in 119, But I don't get any channels. I downloaded a Channel list creted by someone and or is there anyway I can scan my sattelited and get the channels. Please help me. Thanks!
Yes using the remote U can choose your satellites and scan them and add channels to your receiver...its very simple..as easy an turning it off and on...try using it!...there are many screen menus and options...nobody can teach U how to use the remote...little kids can use a remote!
LK I appreciate your help. But my problem is I get 89% level and 90% quality in my in 119 but I still don't get the channels. I know how to use the remote control and even after doing blind scanning I still don't get 119. someone please tell me how to fix it.
The earth and space is made up of longitude and latitudes and the Equator and Prime meridean....U need to go back to school here...there are orbits around the earth ...we have satellites that fly around the earth..Dishnet has satellites in space to transmit signals from...2 of those satellites are in the 110 and 119 orbits..
I have fortec Star, on a Pansat 2500 my system info is: A/7bar FTA Ultra A/7bar -2.82t Boot ver :6.0 Nov.7. 2005 (Nt) Do i need keys for this system? if yes were can i go to put them? and if not, should i just download a new bin? What options do i have? what can i do for this system? **LK** Any Advise?
i had 1.2/ku 7/ku 8.6/ku i deleted all channels from the list, after started to scan 1.2/ku it feeled up than i tryed to blind scan 8.6/ku it didnt find any channeles. So i cleaned it all again, this time i started from 8.6/ku but this time it feeled 8.6/ku than i tried to feel up the 1.2/ku and it gave me 0 result. can any one help me plz
Ce site soutient anti les idéaux américains et anti- anglais parlant. ....so écrit dans n'importe quelle langue que vous voulez, brulez le drapeau et les facons américaines ...and spectacle disrepect total pour tout anglais parlant des membres ici. ..eva syas son bien et elle doit savoir la cause elle est un 11 bleu de jour ici qui est un Riciens de Purto. ..and Riciens de Purto ne paie pas d'impot et peut faire quoi qu'ils veulent a n'importe quel endroit ils Les déchets ces forums les je dis laisse TOUS forums de theses de déchets que j'ai travaillé dur pour développer et maintiennent dater.. bien maintenant son temps pour le démolir !