Need help setting up new computer on home network

 

New member
Username: Pattymarkie

Post Number: 1
Registered: Dec-06
I would appreciate any help setting up a new computer on our home network. We have a Linksys wireless B 2.4 GHZ Broadband Router. Connected to a Comcast cable modem. I attached the Linksys wireless G 2.4 GHZ USB network adapter to the new desk-top PC and I have a message that reads "Local Area Connection, A network cable is unplugged." I am on the Internet now, from a wireless network connection from Linksys on my laptop. Any suggestions would be greatly appreciated.
 

Silver Member
Username: Arande2

400dB could probably d..., 4000 isnt ev... 100,000dB FU...

Post Number: 401
Registered: Dec-06
You could call Linksys like I did and ask them if they can remotely set the correct settings. They integrated my laptop into my network for me.
 

Platinum Member
Username: Project6

Post Number: 12097
Registered: Dec-03
You can ignore that message or you can disable it via the Control Panel. All it does is give information for you that you are not connected via wire to the internet.

Before connecting the USB network adapter you need to make sure that your Wireless Boradband router will accept a "G" series signal.

If it is an older "B" series only router, it is not going to work.

Verify this first before we proceed.
« Previous Thread Next Thread »

Add Your Message Here

Bold text Italics Create a hyperlink Insert a clipart image Add a YouTube Video
Need to Register?
Forgot Password?
Enable HTML code in message
   



Main Forums

Today's Posts

Forum Help

Follow Us