|
Bronze Member Username: Basshead94Centralia, Illinois United States Post Number: 41 Registered: Sep-10 | i got two 13.5 w7s and a t3000.1 amp how should i wire this setup up |
|
Silver Member Username: Lord_huggingtonOntario Canada Post Number: 359 Registered: Oct-10 | Google "subwoofer wiring diagram", and "wiring your subs: single voice coil" or "wiring your subs: dual voice coil". |
|
Gold Member Username: Livin_loudMW2 Addict Post Number: 3440 Registered: Jan-06 | $20 says you don't have enough electrical upgrades to run that. |
|
Gold Member Username: SkdooleyRoanoke, VA Usa Post Number: 1557 Registered: Oct-09 | Wire each sub in series then run the pair parallel. |
|
Silver Member Username: MakinblakMonroe/Monticello, La/Ar Post Number: 575 Registered: Oct-10 | They are 3 ohm right? |
|
Gold Member Username: SkdooleyRoanoke, VA Usa Post Number: 1558 Registered: Oct-09 | Dual 1.5 ohm. |
|
Silver Member Username: PerfectcircleNaptown, Indy Post Number: 294 Registered: Feb-10 | You need to run them in parallel. amp would see 1.5 ohms. with that amp maybe around 2k watts. that would be about right. i am running 2 of those on my 2 wardens and they are huge power hogs. need to make sure your electrical is up to par or you will smoke that amp and possibly your subs from the voltage drop. they really pull a lot of power. |
|
Silver Member Username: MakinblakMonroe/Monticello, La/Ar Post Number: 588 Registered: Oct-10 | What kinda wardens you got pike? |
|
Silver Member Username: PerfectcircleNaptown, Indy Post Number: 295 Registered: Feb-10 | 21"s they're nice, but going to switch up soon. Just bought a third soundstream xxx 18 and i'm going to go in that direction. |
|
Bronze Member Username: Basshead94Centralia, Illinois United States Post Number: 42 Registered: Sep-10 | sorry for the latteee reply but they are dual 1.5s and i have the big three upgrade and a 10 farad rockford cap but my internet is very slow and pictures are 10x slower could one of you possibly upload the diagram on here or send it to me in an email @ mitchellznae@ymail.com and i can check it on my fone |
|
Gold Member Username: Van_manBoston South, MA Post Number: 5466 Registered: Mar-06 | Nice subs. heres a link to jl subs wiring.http://mobile.jlaudio.com/support_pages.php?page_id=161 2 DVC drivers with Voice Coils in Series / Parallel = 1.5 ohm load. Your best bet. Or 2 DVC drivers with Voice Coils in Parallel / Parallel = .38 ohm load if your feeling lucky. |
|
Bronze Member Username: Basshead94Centralia, Illinois United States Post Number: 43 Registered: Sep-10 | im most likely puttin them in a cts wat size box do i need can anyone help with the dimensions and wat size port i need |