Need an amp for my speakers

 

New member
Username: Janmeg23

Post Number: 7
Registered: Oct-09
what amp can power a pair of focal 165krx3 3-way component kit? TIA

specs:
*6-1/2" K2 Power Series 3-Way Component System
*Power Handling:
Peak: 400 watts per set / 200 watts each side RMS: 200 watts per set / 100 watts each side
*6-1/2" Woofer
*K2 Composite sandwich cone woofer
*Tissu surround
*3" Midrange
*TN53K tweeter
*Inverted dome tweeter
*Aramid-Fibre cone tweeter
*4 ohms impedance
*1" Voice coil
*Neodymium magnet structure
*Sensitivity: 93 dB
*Frequency Response: 45-20,000
 

New member
Username: Randy_pre

Port- Of- SpainTrinidad & T...

Post Number: 2
Registered: Nov-09
i need some hepl i want to run a pair of 8'' bemya's 8G40 and t220ti drive can i use my soundstream 880 2 channel amp to run this
 

Bronze Member
Username: Nick_belsky

North Canton, Ohio USA

Post Number: 36
Registered: Nov-09
This is too broad of a question. If you run them 3-way with the passive crossovers, any two channel amp would work. If you want to run active (full or partially) you will need a 4 or 6 channel amp.

When I say any amp, I mean that it will physically work, not necessarily sound good. Obviously, different amps have different sound attributes compared to each other. What kind of budget are you looking at for the amp?
 

New member
Username: Randy_pre

Port- Of- SpainTrinidad & T...

Post Number: 7
Registered: Nov-09
well i want to use a two channel to run everything
 

Bronze Member
Username: Nick_belsky

North Canton, Ohio USA

Post Number: 52
Registered: Nov-09
There are numerous amps that can run this setup and are "recommended."

Check this list and do some research to see what fits your price range...

https://www.ecoustics.com/electronics/products/articles/329117.html
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us