Would This Work out...

 

ThatGuyYouKnow
Unregistered guest
A Bandpass Encloser with 1.96 cu. ft. total (2 subs sharing the same air space)

Work well with 2 subs that need 0.7-1.63 cu. ft.

If that would work well pls reply with a Yes and agree that would work well or a no and tell me why it wouldnt, I need your knowlage.
 

Bronze Member
Username: Davids2004

Houston, TX USA

Post Number: 43
Registered: Jun-04
Yes it would since the subs are in that range.
 

out there
Unregistered guest
now remember that you have to get your tunning right, making sure that you can make the ports long enough.
 

ThatGuyYouKnow
Unregistered guest
btw the ports are builtin, there not tubes, its a diffirent kinda bandpass box.
 

Bronze Member
Username: Redskin

LondonEngland

Post Number: 47
Registered: Dec-03
mostly no it wouldn't work. taking a subs recomended volume for sealed or ported and applying it to bandpass enclousures is a recipe for disaster. as you seem to be talking about a ready made bandpass box to put your subs into, check out "empty prefab bandpass boxes" thread on this board before your layout your hard cash. you can find the thread by using the seach box on the bottom of the message list.
 

Bronze Member
Username: Redskin

LondonEngland

Post Number: 48
Registered: Dec-03
why waste time searching when I could have left a link to the post. try https://www.ecoustics.com/electronics/forum/car-audio/8938.html
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us