Anyone know the thiel small for the se 10 listed here
|
Gold Member Username: InsearchofbassPost Number: 5802 Registered: Jun-04 | https://www.ecoustics.com/electronics/forum/car-audio/196920.html Im try to see if I have an idea how the tcab works |
|
Gold Member Username: InsearchofbassPost Number: 5804 Registered: Jun-04 | if they are the current specs here I found it http://www.reaudio.com/specs.html#sp_se |
|
Silver Member Username: YukhuiMyrtle Beach, South Carolina USA Post Number: 549 Registered: Jan-06 | In many boxes of his the sub(s) is "on top" of the ports and at 90 degree angle. |
|
Gold Member Username: InsearchofbassPost Number: 5805 Registered: Jun-04 | can you draw what you mean |
|
Gold Member Username: Matt12490California USA Post Number: 2564 Registered: May-05 | I think he means the ports are mounted under the motor of the sub |
|
Gold Member Username: InsearchofbassPost Number: 5806 Registered: Jun-04 | hey rearrange you could copy that box in the link its a tcab |
|
Gold Member Username: Matt12490California USA Post Number: 2565 Registered: May-05 | I could.. and I would love to own a tcab, but I have 2 subs and that changes everything. |
|
Gold Member Username: InsearchofbassPost Number: 5807 Registered: Jun-04 | i forgot you dont have the room |
|
Silver Member Username: YukhuiMyrtle Beach, South Carolina USA Post Number: 551 Registered: Jan-06 |  Like ReArrangeYaMind said, the ports are mounted under the motor. Take a notice at how the subs were not centered on the baffle, but instead were focused so both subs were directly under the ports. Mark doesn't use this on all of his boxes, but quite a few on his site have the same characteristics. I couldn't tell you why, it is just an observation I have made.. |
|
Gold Member Username: CenusHicksville, Ohio Post Number: 3357 Registered: Jan-05 | he does this so theres less cancalation in the box, also the back wave essentilly corner loads off the side of the box thus increaseing output. |
|
Gold Member Username: InsearchofbassPost Number: 5829 Registered: Jun-04 | thats what we did with our audioque 12 tuned at 35 hz the motor was right above the port....when it ended up that way I knew that would be a good thing |
|
Gold Member Username: InsearchofbassPost Number: 5830 Registered: Jun-04 | as far as corner loading ill have to run this by my bro for our spl box and see if the score goes up |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics