Help Please!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

New member
Username: Clark09_5hotmailcom

McCook, Nebraska

Post Number: 4
Registered: Mar-07
ok so i just hooked up my subs and amp and if i turn the bass up any louder than ten notches on my stock head unit it makes my subs cut out and about 5 seconds later they start bumpin again which if i turn the bass down than it wont do that. It should be hitting a lot harder than it is. any suggestions? also i have 4 guage wire
 

Gold Member
Username: Carguy

Post Number: 6033
Registered: Nov-04
You need to set the gain/level on the amp properly. If not, you'll the same problem repeating over and over till the amp dies.
 

New member
Username: Clark09_5hotmailcom

McCook, Nebraska

Post Number: 8
Registered: Mar-07
I honestly dont know what that is
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 4304
Registered: Dec-05
well, then read the manual and learn a lil bit
 

Gold Member
Username: Carguy

Post Number: 6035
Registered: Nov-04
Look at the amp. It should have some buttons and dials. One of them will say "gain" or "level". Adjust that according to your HU's preout voltage. If you're not sure, most HUs are around 4v, older ones were 2v, and newer ones are up to 8v.
 

Platinum Member
Username: Glasswolf

Wisteria, Lane USA

Post Number: 11704
Registered: Dec-03
3 threads for the same damned problem you culd have fixed yourself by RTFM?
lovely.
 

Silver Member
Username: Djbeanpole

Naptown, Indiana USA

Post Number: 356
Registered: Nov-05
Is this the original post?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us