not lookin to help SPL. and i know that. caps dont produce power. i was wondering what a farad is. and what it has to do with everything. i need a cap or 2 because ill be running about 2000 watts RMS. and i know ill need a new battery.
I am using 2 caps. 1 is 1 fared, the other is 1.5 fared. My alt is 140amp, Im running 6 amps, 3 sets of Christmas lights off a inverter, and I have no dimming. I never ran with out the caps so Im not sure if they are helping or not, But I like the look, and Im sure the dont hurt it none. Most recommand 1 farred per 1000 watts.
What were you trying to say? If you replace the stock battery with a HC, then you dont need a cap? or get an additional HC (and keep the stock battery under the hood for starting car ect.) and place the HC near the amps to draw power from.? like the battery would be the cap.
ok well you shouldnt mix battery types. so if you have a normal stock starting battery you could either get a battery isolator and put the kinetik in the back by your amps, or replace your starting battery with one, but for it to act like a cap is needs to be close to your amps.
honestly i dont know about running a HC with your starter batt. in parallel without an isolator.
most people say dont mix battery types and stuff like that, but you might be able to im not sure thats why id email kinetik