Check my measurements!!!


Silver Member
Username: Monkey_man

Post Number: 403
Registered: May-05 i got an idmax. Hurray! Now im tryin to build a slot port enclosure for it. The enclosure specs says, 2.55 gross cu. ft. tuned to 28hz with 4" i.d. by 15" long. After alot of researching and understanding how ported enclosures are made, i have came up with these calculations: 36" width, 15" height, and 11" depth(i might change around the depth and width a lil). The port slot will be 2" by 9.28" (prolly more like 9) by 10". What do ya guys think?

Bronze Member
Username: Greeney

Grove, MN US

Post Number: 18
Registered: Dec-05
id go 13.5 for the height personally and extend the depth- i like the plans tho

Silver Member
Username: Monkey_man

Post Number: 405
Registered: May-05
Thanks alot. I wa just making sure that the port area didnt mess with the gross area after i converted the round port to slot port.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us