Rockford amps?

 

New member
Username: Markstanco

Texas

Post Number: 6
Registered: Jul-05
I about have it narrowed down here and wanted some opinions.

Putting the RF P212S4 Subwoofer in a ported box
adding the RF P3001 Mono and the P3002 for the highs.

Should this sound fine?
 

New member
Username: Elusive_peanut

Knoxville, TN

Post Number: 7
Registered: Jul-05
I wouldn't put a mono amp on a 4 ohm sub unless you are satisfied with getting half the rated power from the amp (or you are going to run two subs).

Put a p3002 on the P212S4.
 

New member
Username: Markstanco

Texas

Post Number: 8
Registered: Jul-05
Just picked it all up late this afternoon. I upgraded a bit. :-)

RF T112D4 rated at 600 watt RMS for the woofer

RF P6001bd for the mono amp

P 2502 for the highs on 4 speakers at 2 ohms.

I know, it looks to be base heavy but you would be surprised how sound from under the floor is muffled through fiberglass (dont know why but it is).
 

Bronze Member
Username: Big_oso

Post Number: 64
Registered: Jun-05
mark i have a good amp for them subs ill sell you cheap a rf p5002 its warrentied through 08 let me know if your interested itll run 500 rms @4ohm
 

New member
Username: Markstanco

Texas

Post Number: 10
Registered: Jul-05
cant handle the 500 RMS. Speakers are Marine grade Clarion. I am thinking they are either 100 or 150W speakers.

Will be upgrading to MB Quart Marine next week more than likely. Clarion is decent, by the MBQ's suuuure sound nice!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us